Hey gooface, good to have you joined the AMD family

Dun complicate yourself too much on this. My advice is to 1st try 4GHz 20x 200 FSB @ 1.312v-1.328v with 1600 C7/C6 & CPU NB/HTT @ 2800-3000

Try the bios settings below & move on pushing :-

CPU Vcore: 1.312v-1.328v
Ram volt.: depends on kind of rams being used, but 1.65v will usually do 1600 C7/C8
CPU NB: 2800-3000 @ around 1.4v-1.45v
NB/HTT/PLL: leave the volt. to auto/normal is fine
Temp. around 20 something should be fine

Have fun with the UD5 & 1090T.....good luck !
Quote Originally Posted by gooface View Post
I just got one of these boards and i have a couple of questions (new to overclocking AMD's, was a intel guy but this 1090t won me over)

so question, whats the max temps for this chip?

whats this whole thing about northbridge mhz thing cuz when i set it higher my system is unstable, so what do i need to increase (volts) to make it stable?

also, to overclock with this board what are the things i need to overvolt/overclock to make it stable other than the CPU?

thanks for all the help!

btw should i overclock with FSB or the unlocked multi?

please someone help me with this chip I dont know what im doing...