Gigabyte GA-MA790FXT-UD5P Thread

[jprovido]

you have to disable the turbo clock feature its in the bios turn it off and does not downclock any more

iam using the F8F seen the gigabyte site theres a F8H is it any better ?

the turbo clock feature is also disabled. even now it's still downclocking to 800mhz with my 4ghz 24/7 OC setting. weird..

[MD]{]

try the F8F bios

using it and it does not downclock

also theres no F8G on the giga website

they ha a F8H but the links are dead

cheers

but some how the voltage on the CPU sometimes goes craisy keeps raising and coming down until it freezes

this on F8F

[Balb0wa]

oops

[MD]{]

oops

oops what ?

[MD]{]

does any one downloaded the F8H bios ?

giga site the links are dead

[Balb0wa]

oops what ?

Thought id got the F8H bios :-( , got a 1055T coming tomorrow

[michaelmou]

Maybe if you ask Gigabyte, you'll get F8H. They sent me the F8G BIOS.

[stasio]

GA-MA790FXT-UD5P - F8h

[wez]

GA-MA790FXT-UD5P - F8h

Cheers, will give it a try

[MD]{]

GA-MA790FXT-UD5P - F8h

thame prob the link is dead

[stasio]

thame prob the link is dead

[wez]

GA-MA790FXT-UD5P - F8h

Cheers, will give it a try

Clocks and volts are all over the place with f8h as well. Will give f8f a go
Link works fine btw

Edit: MBK, if you want you can pm me your email and I'll send them over
Edit2: f8f behave a lot better, no multi/voltage switching

[Barr3l Rid3r]

Hey guys did u tried Ctrl + F1 while in F8H? they said there is a CPU control option.

[MD]{]

Clocks and volts are all over the place with f8h as well. Will give f8f a go
Link works fine btw

Edit: MBK, if you want you can pm me your email and I'll send them over
Edit2: f8f behave a lot better, no multi/voltage switching

the links are good

but iam having the oposite problem F8F is voltage probs and F8H no voltage prob

[MD]{]

for what ive been testing this F8H is the most stable bios

it only bumps the defalt vcore to 1.475 put i can run the 1090T at 4.125mhz at 1.350 just need to lower the voltage now becouse the default vcore is higher

this bios does have some problems including the f8G that show the cores downcloking in CPUZ only F8F show cores at allways the speed of the OC in CPUZ but for me F8F was crasy had to enter all the times in the bios config and save setings becouse it never aplies them in the 1º boot and vcores some how allways at 1.600 , but the problem in this 2 bios F8G and F8H is CPUZ related becouse the cores are at the oc speed all other programs show the all 6 cores at the same speed whith AMD coo and quiet off and core turbo off ive test it with 1.52 cpuz and shows the cores at same speed only the latest 1.54 cpuz version was some quind off flutoations

cheers

[wez]

Yea, after a frustrating night with f8f I went back to f8h. f8f didn't want to play nice with my RAM at all. Vcore got bumped very high after a crash, so anyone running f8f be careful. f8g/h doesn't seem to suffer from that, nor dodgy ram clocks.

[MD]{]

i have receved a msg from gigabyte becouse when a while ago i could not download the F8H from there site from some reason , heres a response :

Attach is BIOS for supporting 6 cores CPU. You should be able to update it and try again later. After bios updating, please do not forget to load BIOS fail-safe default setting and please also do not try to overclock your system at this moment.

For more information about BIOS upgrading, please click HERE.


Regards,
GIGABYTE TECHNOLOGY

so it means that there will be another bios from what i think

better then this one

[wez]

i have receved a msg from gigabyte becouse when a while ago i could not download the F8H from there site from some reason , heres a response :

Attach is BIOS for supporting 6 cores CPU. You should be able to update it and try again later. After bios updating, please do not forget to load BIOS fail-safe default setting and please also do not try to overclock your system at this moment.

For more information about BIOS upgrading, please click HERE.


Regards,
GIGABYTE TECHNOLOGY

so it means that there will be another bios from what i think

better then this one

Please upload it somewhere, or mail it to me, coccis_wez[at]hotmail.com
Would be highly appreciated

Had a chance to test it yet?

[Mtemel]

"isnt this for ud5?"

UD5 is on BIOS F3....,UD5P on BIOS F8....
Not every beta BIOS appear on Giga site(yet).

i was about to update my bios when this coment really confused me.

i have a gig 790fx ud5 i believe..

can someone clear up what the above comment actually means?

do i need to download a F3 bios of some kind?

[wez]

"isnt this for ud5?"



i was about to update my bios when this coment really confused me.

i have a gig 790fx ud5 i believe..

can someone clear up what the above comment actually means?

do i need to download a F3 bios of some kind?

Think they meant the new 890FX-UD5 board
Check cpuz if you are unsure what board you have.

[Mtemel]

Think they meant the new 890FX-UD5 board
Check cpuz if you are unsure what board you have.

I have GA-790fxta-ud5 mobo this is what cpuz shows so what bios would i need?

[wez]

I have GA-790fxta-ud5 mobo this is what cpuz shows so what bios would i need?

http://download.gigabyte.eu/FileList...ta-ud5_f3f.exe

[Mtemel]

http://download.gigabyte.eu/FileList...ta-ud5_f3f.exe

thx wez! <3 such a helpful dude!!

edit: btw whats the difference between ud5 and ud5p mobo's any idea?

[MD]{]

after few tests and iam still testing my cpu works a 4125mhz 1.300v / NB 3000mhz @1.160V / CPU/NB@+225 /HT 4500mhz

heres gos few tests whith diferent mem specs and ht lower and higher

also starting to test the CPU at 4500mhz and its stable at 1425v whith the other seting i stated above


[COLOR="SandyBrown"]



Uploaded with ImageShack.us






































this is my precious a pal here was same specs as me and cant do the mhz the same voltages i have think this is a very good cpu

still doing tests

for the best 24/7 setup

[wez]

Six cores at 4.5ghz with 1.4v, on air? wow man, great chip! Need some stability tests though
What bios was this on?