difficulty and the right choice-aircooling for Thuban

[Tomasis]

Yeah, right...

"Where to Buy 3Rsystem's Iceage 120 Boss II Heatsink?

Unfortunately it's one of the best heatsinks you cannot buy. This heatsink design has apparently been OEM'd by EKL as the Alpenföhn Nordwand Rev. B heatsink for €49.90 EUR. Spire have a similar model called the TherMax Eclipse SP984B1 for $48USD / €32 EUR. Note that neither cooler uses the same fan as on the 3Rsys model. "

how is noctua d14 you are running? Spire seems be available in Europe. 30€ is good price

[Cele303]

how is noctua d14 you are running? Spire seems be available in Europe. 30€ is good price

I'm testing 1090T with Crosshair IV Formula, 24/7 -> 4050mhz 1.40v, nb 2925 1.300v, ram 1800 6-6-6-18 1.70v, ht 2025 1.100v

idle 18°, load 39°c outside computer case in normal spring ambient

[FlanK3r]

cele:n1, whats series 1090T?

[I.nfraR.ed]

idle 18°, load 39°c outside computer case in normal spring ambient

So you wanna say that the temperature in your room is below 18 degrees?
The thing I want to say is that AOD readings definitely aren't right...

[FlanK3r]

sensors at Thubans are bad.

[Naturecannon]

I'm testing 1090T with Crosshair IV Formula, 24/7 -> 4050mhz 1.40v, nb 2925 1.300v, ram 1800 6-6-6-18 1.70v, ht 2025 1.100v

idle 18°, load 39°c outside computer case in normal spring ambient

Add about 10+c to your temps. More like idle 28°, load 49°c

Your going by the individual cores. Check out the screen of CPUID

sensors at Thubans are bad.

Dont think so, wouldnt MB/bios temp reading be wrong if that was the case?? Just asking

[FlanK3r]

yes, this is possible.+10 C. Interest is new AOD, cause its look support for 8-cores CPU . Whats mean ,-) ?

[Manicdan]

yes, this is possible.+10 C. Interest is new AOD, cause its look support for 8-cores CPU . Whats mean ,-) ?

its nice it can do 8 cores, but by the time we get 8, 12 will be right around the corner, then what. (unless this is built to work with some 2p opty machines)

[FlanK3r]

than Fusion ,-)...my theory is, second generation of BUlldozers will base Fusion (CPU+"GPU"+special controller CPU-GPU), at Lliano now they testing it.

[FlanK3r]

today is my birthday and i was so lucky, my x4 1090T today came to me :-D...Tomorow or at thursday Corsshair IV coming and later second board GA890FXA-UD5. So..., someone know, how good is this series? Chew has too 1015???

[FlanK3r]

about 1015 series i found here some experience 1015 OC It looks good, mostly 4GHz+ stable

[Zeus]

Happy birthday Flank3r (or is it flankerp ) and good luck with your new cpu and motherboard. Very nice combination by the way.

edit: i see DPMW, like mine and i think it's serial# 453?

[FlanK3r]

im in work now, but think, its "153" (what means this numbers exactly?)

[crazydiamond]

people say the lower the number the better the chip because it comes from the center of the wafer but i think its still mostly batch dependent. like #500 from one batch might clock better than #1 from another batch, but from within the same batch maybe lower numbers could produce slightly better oc than higher numbers

[FlanK3r]

this information looks good...next days and mostly at weeks coming my first expirience with this chip.

[wuttz]

hey flank3r happy birthday man!

[FlanK3r]

for few minutes i got Crosshair IV Formula. Friday il have a bit more time and for building my second PC (my 965 BE system downgrade to HD3870 and only one HDD ).

And thanks boys for gratulations

[FlanK3r]

second Thuban (for AIR and extreme testing) on the way boys and MA890FXA-UD5, il happy again

[imamage]

Second Thuban ?
Will that be 1055T?

[crazydiamond]

cool. hope you get another 1015dpmw, ore one even better if its possible

[Zeus]

cool. hope you get another 1015dpmw, ore one even better if its possible

If better, he's gonna sell his old one to me.

[FlanK3r]

ZEus: yes, will 1090T and think 1015 too. Il testing it quickly with AIR (box) 2 D and than under LN2 hope, first action between 4.-6.7.