[XS]Just got Phenom II x6 1055T (Retail)

[Lightman]

Nice clocks guys!

During a short time I had with my 1090T I needed 1.45V (vDropped from 1.5V set in AOD) to do Cinebench R10 x64 full test at 4GHz.
It is very new system so anything can be wrong, but I wont have a chance to find out till at least tomorrow late evening.

Keep testing these CPU's! Gives me better overview where to go with my settings

[richierich]

@richierich, PLease report back with your PRIME 95 results ? I want to see AT MINIMUM 1 hour PRIME95 stable results, please !


All those with MSI 790FX-GD70, can you PLEASE report if the new 1.A bios is able to disable the Turbo boost ???? PLEASE !

My sweet spot for performance / power consumption:

[barong]

mine
vcore 1.41 @ Bios

[TurboDiv]

Thank you @richierich. This looks awesome.


@barong, can you disable Turbo Boost ? Is the option available ?

[barong]

yes it can, the turbo wont kick even if u only use 2 cores, i already tried i think it because my cnq

[richierich]

I haven't seen CnQ being able to be disabled yet, even if it has been disabled in BIOS.

[cory1234]

mine
vcore 1.41 @ Bios

Just high on linx? Why not max :P What were your temps like? Max stable OC?

[Sennebring]

For some reason Gigabyte says the default vcore is 1.475, in the BIOS. But if you leave it at normal it's actually 1.35v.

Great! Then it is going to be fixed with an biosupdate My 1055T makes 3dmark vantage @ 4GHz with vcore 4 steps up from stock vcore. Just under 20k CPUscore.

[FlanK3r]

look, all 1010 series are good for OC..

[felix_w]

Biostar TA785GE DDR2 + G.skill PK 1066 +1055T

I guess it's the first result with thuban on DDR2 reported so far.

[vandiesel]

NB2570-2650

1010BPMW
batch 00038

what mem divider are you running memel?

cheers

[richierich]

So comparing i7 benchmark results with mine, and my system blows away theirs, yet their CPU score is still high. Can anyone explain why?:

Mine:



Theirs:

[informal]

@richierich

It's simple man,look at the different versions of the benchmark you used(6.1 in your case and 7 in theirs)...

[richierich]

Ok I'll try to run the latest one later today and see what happens.

[memel]

what mem divider are you running memel?

cheers

memclock 667 5-5-5-15 @ ~980Mhz DDR2 (HTT294)

[richierich]

ok new PassMark 7.0:

[Balb0wa]

ok new PassMark 7.0:

310 bus speed on a ud4p? what are your bios settings?

[richierich]

What BIOS settings are you looking for?

[Balb0wa]

What BIOS settings are you looking for?

ive just got a 1055t, on a ud5p , struggling to get it past 270 bus speed.

is your ud4p fxt or fxta?

[informal]

Passmark looks to be mostly singlethreaded test by looking at those Thuban scores. There are a few subtests that support multicore,but overall not a test to use for multicore perf. evaluation.

[xVeinx]

The integer performance is where the score is taking the hit. It's half of the Intel (according to the benchmark anyway)...

[richierich]

ive just got a 1055t, on a ud5p , struggling to get it past 270 bus speed.

is your ud4p fxt or fxta?

Only XT. What voltages are you running?

[richierich]

Another sweet spot:

[nunchucka]

could someone run a x264 benchmark with their OC please. i am thinking about an upgrade but want to see some results to compare too..

http://www.techarp.com/showarticle.aspx?artno=520

Results for x264.exe r1342
--------------------------
encoded 1442 frames, 78.41 fps, 3900.68 kb/s
encoded 1442 frames, 77.10 fps, 3900.68 kb/s
encoded 1442 frames, 77.75 fps, 3901.21 kb/s
encoded 1442 frames, 77.10 fps, 3901.23 kb/s
encoded 1442 frames, 25.21 fps, 3970.20 kb/s
encoded 1442 frames, 25.28 fps, 3970.63 kb/s
encoded 1442 frames, 25.30 fps, 3971.69 kb/s
encoded 1442 frames, 25.38 fps, 3970.42 kb/s



thx in advance


edit: oppps i just caught some numbers in this very thread... looks like a upgrade is at hand

[Utnorris]

Ok guys, I haven't dealt with an AMD setup in awhile and I am running into some issues. I have the Biostar TA785G3 and the 1055T. I replaced my 435 Triple Core with it after making sure I had the latest bios for 6 core support. First in the bios default CPU voltage shows 1.42v, sound right? Second, it will not boot into Windows, it keeps crashing, again this is at default settings. Any ideas?

Specs are:
1055T
Biostar TA785G3
2 x 1Gb Patriot DDR3 1333Mhz ram
Windows Home server
On Board GPU

I can stick my 435 back in and it boots fine, am I missing something here?

Thanks.