Gigabyte GA-MA790FXT-UD5P Thread

[wez]

GA-MA790FXT-UD5P - F8h

Cheers, will give it a try

Clocks and volts are all over the place with f8h as well. Will give f8f a go
Link works fine btw

Edit: MBK, if you want you can pm me your email and I'll send them over
Edit2: f8f behave a lot better, no multi/voltage switching

[MD]{]

Clocks and volts are all over the place with f8h as well. Will give f8f a go
Link works fine btw

Edit: MBK, if you want you can pm me your email and I'll send them over
Edit2: f8f behave a lot better, no multi/voltage switching

the links are good

but iam having the oposite problem F8F is voltage probs and F8H no voltage prob

[MD]{]

for what ive been testing this F8H is the most stable bios

it only bumps the defalt vcore to 1.475 put i can run the 1090T at 4.125mhz at 1.350 just need to lower the voltage now becouse the default vcore is higher

this bios does have some problems including the f8G that show the cores downcloking in CPUZ only F8F show cores at allways the speed of the OC in CPUZ but for me F8F was crasy had to enter all the times in the bios config and save setings becouse it never aplies them in the 1º boot and vcores some how allways at 1.600 , but the problem in this 2 bios F8G and F8H is CPUZ related becouse the cores are at the oc speed all other programs show the all 6 cores at the same speed whith AMD coo and quiet off and core turbo off ive test it with 1.52 cpuz and shows the cores at same speed only the latest 1.54 cpuz version was some quind off flutoations

cheers