Q9550 on SS, Results 4xWR in category Q9550 PiFast/ Super pi 1M/wPrime 32m/CPU-Z

[Kamil Grzbiecik]

Hi all, I took to overclock Q9550 several times but have never had enough time to thoroughly test it, now was the time and willingness to check the max Valid sat down to test its capabilities in the benchmarks and I'm pleasantly surprised by its capabilities.

I think that the only long bench will be improved because the super pi 32M was made without a majority tweaks, checked the equipment if possible.

Config:
CPU- I C2Q Q9550
Mobo- GIGABYTE GA-EP45-UD3P
RAM- Crucial 10th Anniversary
GPU- HIS HD5770
PSU- Chieftec 650W



WR PiFast 19.47s


WR Super pi 1M 9.641s


Super pi 32M 10:42,813s


wPrime 32m 8.266s


wPrime 1024m 4:24,782s


Valid 4.834Ghz


After extra time


Super pi 1M 9.609s WR corrected



WR wPrime 32M 8.109s


WR CPU-Z 4.871Ghz

[cesariuth]

good work man
775 never die!!!

[boblemagnifique]

impressive FSB for a Quad Core

Congratz

[ToxicWk]

Whoa. Thats some serious FSB for a quad. Keep pushing it and get every WR

[Hoss331]

Very nice chip

[miahallen]

Great stuff on SS...nice job

[jabski]

impressive FSB for a Quad Core

Congratz

+1

congrats on crazy fsb

[scooter.jay]

I'll say it again very nice fsb

[Sesto Sento]

E0's quads really are impressive.
I have a good Q9550 C1, wich i use for daily use at 475fsb (4037mhz) cooled by corsair H5O, and can bench easily at 500fsb (4250mhz) rock stable for every bench i throw at it and even play any game for hours without a sweat, but for this 500fsb needs some massive voltages... Max benchable fsb is 505mhz.

All of this on mine Asus P5Q-E.

But 570++ mhz fsb is really impressive great board you have there also man

Impressive results.
Can you afford to put this baby on LN2?? maybe 600mhz fsb possible like that

[In-Fluence]

Damned impressive! I got as far as 563 for my q9650 (also 566, but unvalidated). What kind of volts were you using for VTT and MCH during benching? Skew values too please

Good job there though, seriously well done

[G.Foyle]

Excellent numbers congrats!

[polpi_91]

great score!!!

did you have use some special trick for ram 5:6?

[Kamil Grzbiecik]

What kind of volts were you using for VTT and MCH during benching? Skew values too please

VTT-1.7v
PLL-1.99v
MCH-1.52v

Any suggestions? :d

Thank you all

[Hondacity]

excellent scores!

did you freeze the northbridge?

[Marco André]

excellent scores!

did you freeze the northbridge?

Don't think so, check last picture

[DEVIL K-ce]

Congrats Kamil, now change cooling to ln2 and have fun

[Samu 17]

very good session!!! on my q9400 i got 542 on air on gigabyte ep45-ds5..i have to try on ln2

[kagula323]

congrats Kamil .... nice numbers ... that's another great example of what Gigabyte's UD3P is able to do with quads ... is simply magic

[Kamil Grzbiecik]

Processor sold, it was hard to part with him

[Mehdi_FXX]

Hi Guys......I have Q9550 too. my best cpu-z validation is 4689.5 MHZ ON LN2 ......
9550 has no problem with Tempture seriously that was -45
I Thing fsb -wall is on 550 MHz (550*8.5)
but I beat It and Achive 552 MHZ for Fsb
now for beat 570MHZ FSB Whats setting do i have applaying?
Dear, Kamil Grzbiecik can you Help me? plz
Config:
CPU:C2Q 9550
MB:GIGABYTE GA- EP45-UD3P
RAM:CSX 2*1 GB DDR2 1200 (D9GNH)
MOBO:GIGABYTE 9600 GT SILENT OC
PSU:seven TEAM 1235w with 4 +12V RAILS @ 25A (1080W ON +12V WITH 90A)

Thanx all

[Boulard83]

Thats some very nice clock and result !

I dont miss my Q9550 but your doind great with this one !

[Kamil Grzbiecik]

FXX-DK:
What VTT and PLL give?
What Bios are you using?
In many * C is CB?

I will try to help.

[Mehdi_FXX]

Thanks Kamil ........
actually The profile for that Result was:
CPU Vcore:1.568V
PLL:1.85V
VTT(CPU Termination):1.66V
DRam Voltage:2.48V
Memory Multiplier:2.4B and timing:5-5-5-18
NB:1.54 V
BIOS: F10 Version
and CB was in -45

thats it .......

and My 9550 Batch:L921c068