[XS]Just got Phenom II x6 1055T (Retail)

[imamage]

So do I have to buy a 1090T to get over 4ghz?

Not really
My 1055T can do it with 285+ HTT with Biostar TA890GXE

[imamage]

What's even funnier is that my 1055T also has BPMW, the 4th Phenom II chip I've gotten that was made from that factory.

Sounds like BPMW are good one

[Zeus]

23K5 in cinebench 10 and 7.5points in cinebnch 11.5...OMG!! Magic!

[imamage]

Boot up @ 330X14 @ Vcore 1.63.

Too bad Nforce 980a board need new bios revision

ASUS 980a or MSI 980a

[imamage]

I just sold my 1055T out , can't wait to get 1090T
probably available the next few days in Hong Kong

[PetNorth]

Please link me a file for that benchmark

Here http://www.techarp.com/x264_Benchmar...rk_HD_v3.0.rar

You need to install (if it isn't) AviSynth http://sourceforge.net/projects/avisynth2/

How to running it http://www.techarp.com/showarticle.a...pgno=1#running

The important one is the second pass, it's where final encoding is done.

[=SOC= Admiral]

OCCT: http://www.ocbase.com/perestroika_en/index.php?Download

Prime95 64-bit: http://files.extremeoverclocking.com/file.php?f=205

Cinebench R10: http://downloads.guru3d.com/CineBenc...load-1708.html

Cinebench R11.5: http://www.maxon.net/index.php?id=162

Everest Ultimate: http://www.lavalys.com/support/downloads

The Bolded Item is not working after you click on I agree link. All I get is a Google could not find message. So im just going to have to work off OCCT, Prime 95, Cine 11.5 and Everest as well as anything else my friend brings with when he helps me install. Big case and heat sink need help. I also happen to be overly careful with hardware and never want to pull on anything to get it off. I also dont have any arcti clean. Thats mainly what hes helping with.

[richierich]

The Bolded Item is not working after you click on I agree link.

Try this one: http://www.brothersoft.com/cinebench-70565.html

[richierich]

Here http://www.techarp.com/x264_Benchmar...rk_HD_v3.0.rar

You need to install (if it isn't) AviSynth http://sourceforge.net/projects/avisynth2/

How to running it http://www.techarp.com/showarticle.a...pgno=1#running

The important one is the second pass, it's where final encoding is done.

Ok will try to run the benchmark in a few hours when I get home.

[mAJORD]

my results forcompare..




38FPS, very strong on 2nd pass

[richierich]

mAJORD, why's your HT Link so low?

[=SOC= Admiral]

1055T was shipped going through USPS which is really better because they take care of packages and we have one of those big sectioned mailboxes so if there is a package they put it in a package box and put the key for the box in our mail box. The only problem with USPS is I cant track its progress. It will arrive anywhere between between Thursday the 29th and Saturday May 1st.

Also that link worked Rich. Thanks.

[PetNorth]

Ok will try to run the benchmark in a few hours when I get home.

Thanks

BTW, another good one: TrueCrypt built-in benchmark


http://www.truecrypt.org/downloads

[PetNorth]

my results forcompare..




38FPS, very strong on 2nd pass

Great!

Yours is the third place

http://www.techarp.com/showarticle.a...tno=669&pgno=2

[mAJORD]

mAJORD, why's your HT Link so low?

something with my MB (GA-MA770T-UD3P) I get idle, and / or load freezing with HT any higher once I exceed about 250 ref clock.. I notice others running higher HT, hence I suspect the MB.

[mum]

Great test
Excuse me, can you do a test Phenom X6 in game II (Metro 2033 for example) (to 4GHz)?? VS Phenom II X4 955 (4ghz)?

I found this test but this phenom II X4 1055(2.8ghz) does not look terrible game ...

Probably I'll be buying a 1055T and replace my Phenom X4 II 550be.

And do you think, in game only ,at 4ghz, the phenom II X6 is better than Core i7 9xx or i7 8xx at 4ghz ?
Thanks

[informal]

mum, games are not much optimized for multicore chips... One thing you get with X6 is 3 or more cores being ready to do anything you like while you are gaming at the same time! This is great since you can fold and do world community grid or you can encode audio/video and still be able to have the same performance as if you are just gaming due to sheer number of available cores to you. This is also known as multitasking and these chips look like they were born for this kind of usage. Not to mention X6 clock great and have lower temps due to process node improvements AMD made with their 45nm SOI tech.

[richierich]

[ridney]

nice richie! push it!

[informal]

richie great score @ 4.3Ghz,you are only 18% slower than Gulftown at the same clock in that test
http://www.techarp.com/showarticle.a...tno=669&pgno=2

Gulftown @4.3Ghz - 47.68
your score from Thuban @ 4.3Ghz - 40.36

[[XC] Synthetickiller]

richie great score @ 4.3Ghz,you are only 18% slower than Gulftown at the same clock in that test
http://www.techarp.com/showarticle.a...tno=669&pgno=2

Gulftown @4.3Ghz - 47.68
your score from Thuban @ 4.3Ghz - 40.36

That's incredible considering the price difference.

I wish I had an excuse to go x6.

I can't wait to see all the max 1090T runs.

[ridney]

richie great score @ 4.3Ghz,you are only 18% slower than Gulftown at the same clock in that test
http://www.techarp.com/showarticle.a...tno=669&pgno=2

Gulftown @4.3Ghz - 47.68
your score from Thuban @ 4.3Ghz - 40.36

which brings us to...

Gulftown $1000 / 47.68 fps = $21/fps
Thuban $200 / 40.36 fps = $5/fps

Thuban wins the price/perfomance ratio by a WIDE margin

I can't wait to see all the max 1090T runs.

i have a strong feeling we'll be seeing guys running 4.5 on air and perhaps a few at 4.6 to 4.7 max

[informal]

A small correction ridney ,that Gulfy is 1600$ since its a server version

[ridney]

oh my bad, then that makes it a "NO CONTEST"

[informal]

It never was a contest in perf./$,even if the price was 1K for that Gulftown .