Quote Originally Posted by Blueking View Post
Did sand them down a bit yes

One thing that I am a bit surprised at was EK doesn't ship with pads to have between bolt head and motherboard, when mount dismount mount dismount I noticed that film on electric cirquit was beeing thinner and uncovered electric path. Decided put some protection to prevent shortening.
Really? Wow, surprised you could even screw any of them in that tight, I don't think I can!

Quote Originally Posted by Fritz_the_germ View Post
Yo Lsdmeasap,
I could install the latest version of EasyTune6 right now. I had to do it twice cause the first install broke down for some reason. The second install hit the top.

Thanks for your advices!

You you know why the Xeon have such a hard time to work out with even multipliers ? The 200*20 was a no go for my system but the 195*21 was alright at the first shot. I had to increase the QPI/VTT up to 1.38v and the VDimm up to 1, 64v though.

A few posts ago you mentioned that noone is quite sure about how much VTT a "Gulfi" would take on for a 24/7 use (Intel says 1.4v is max.).
So is there anybody about being sure how much VTT a Xeon DO is able to take without degradation? The ViD is 0.996v VCore.
Nice to see you got it installed, I'll have to check out the latest version then. Installed is easy, does it freeze when you change something/anything and hit apply? That has been my issue with the past 10 or so versions of it

Nope, no one is sure yet about these CPU's and voltages, only time will tell.


Like Dino said above, CPU multi is easier to get going on an Odd value so best to try those out as the even ones will require much more voltage to get stable