If not only the looks, but also performance matters for you, believe me, It's one of the best PSUs the money can buyOriginally Posted by Edward88
If not only the looks, but also performance matters for you, believe me, It's one of the best PSUs the money can buy
Nice camera. Photos will be even better:>. Nikon D90 one of the better cameras in its price class very good choice, but the covenant itself probably buy the cheaper Canon 550D. The new Champion Nikon D3S is a great addition to almost indestructible. Only the price kills ;>.
As for the Cards took me to the ATI is much less heat than the new GF Fermi. I suspect that like to lie down on the fermi could have broken an egg is to fry up nicely ;>
After the event, as the only Metro 2011 and new coming up Battel field uses the new possibilities GF 470/480.
GF 480 in full temp are 90 – 105 Celsius wery nice heater for the winter.
I will try it in my project.Nice to see that not only did I want to use the 1200 watt power supply in draft.
Good Luck whit your draft Malik.
If not only the looks, but also performance matters for you, believe me, It's one of the best PSUs the money can buy
I really dont think so . . . antec is not the best brand for psu, not even close.
I have one antec 850 dead, now i have one corsair hx 850 and that is a really good psu.
Antec is overrated imho like thermaltake
I'm not talking about Antec PSUs in general, It is all about their Signature seriesI really dont think so . . . antec is not the best brand for psu, not even close.
I have one antec 850 dead, now i have one corsair hx 850 and that is a really good psu.
Antec is overrated imho like thermaltake
If you have an SG-850 unit that died on you, It could just have been some faulty / defective part that caused the malfunction
Last edited by Tigris STI; 03-31-2010 at 11:44 AM.
I've Got The power ...
First watch this LINK and then photos
Can I get some insight here? I want to go for best quiet cooling at low use to idle mode on a 4.3GHx i7 930 (@ 1.32v) w/ single GTX 260 on Rampage II Extreme. This system sits on my desk so I am interested in quietness a night or during music editing. As long as it cools equal to if not somewhat better then when on air (755c or below) I'm good. I am more interested like I say in the desktop idle temps at low flow. I have XSPC RX240 Dual 120mm Radiator. The box doesnt have space for bigger rad inside but willing to add additional dual externally to keep it quiet if ned be.
Thankx in advance
4.250GHz (1.331v) @ 212 x 21 @ 2:8 DDR1600 @ 6-7-6-18 (1.657) ASUS RAMPAGE EXTRENE w/ Q6600 @ 3.8Ghz daily
ASUS RAMPAGE II EXTREME, X58 w/ ICH10R
Intel Core i7 930, rev. DO, batch #3951A824
Mushkin Redline 998691 PC3-12800
ASUS ENGTX460 GTX-460 DirectCu 1G
Creative X-Fi Titanium Fatal!ty Champion
SilverStone Strider ST80F 800W Quad 12v
WD Raptor 74GB, 10K x4
Danger Dan WaterBox Plus
Windows 7 Enterprise x64
Swiftech Apogee XT Copper Top w/ AS#5 (lapped to CPU)
hmmm, ain't gonna be easy to sleeve these cables!! but she does look good...
good luck to ya!
doctor pepper's desk
EVGA P55 FTW | i5 650 @ 4GHz | 4Gb Corsair Dominator DDR3-1600 XMS3 | XFX 4870 1Gb | Corsair X32 | Samsung SpinPoint F1 - 320Go | Fractal Design Newton R2 650W | Samsung P2450H | Microsoft Laser Desktop 7000 | JBL Spyro Black
AirCooling: Prolimatech Mega Shadow | Xigmatek Bifrost | Fractal Design SATA Cluster Box | Fractal Design 2x120mm, 2x140mm and 1x92mm
Cosmos-S
Foxconn BloodRage Rev1.1 Bios P07 | i7 920 D0 @ 4,629GHz max & 4,3GHz stable | 6Gb Corsair Dominator DDR3-1600 | XFX 5870 | Sonar X-Fi | Intel X25-M 80 Go PostVille | Samsung SpinPoint F1 - 1To | Corsair HX620W | CoolerMaster Cosmos S | Samsung T240 | Logitech MX-5500 & Z-2300
Watercooling: Laing DDC + plexi top and tank | CPU - HK 1366 rev 3.0 LT | GPU - EK Water Blocks EK FC5870 V2 - Acétal Nickel | MB - Foxconn's original | HDD - HK SilentStar HD-Single rev 2.0 | radiator - 3x120mm | tubing - High Flex 10/16mm | red PrimoChill ICE coolant
Malik, how do you plan on sleeving that beast? Are you going to cut out the capicators and resolder the connectors?
Regards,
Chris
Core i7 920 3931A318 4.4GHz 1.375vcore | EVGA X58 Classified E760 | EVGA GTX470 1280MB | Corsair Dominator GT 7-8-7-20 1688MHz | Heatkiller 3.0 CU and Feser xChanger 480 | Seasonic M12 (Soon to be replaced)
Not beast ... but something like that i will be sleeving:
BTW, cable extensions are the one and only way to go with TPQ 1200 'cause removing those "Turbocache" capacitors leads to huge fluctuations on 12V rail...
Malik, it`s loooong one. Wonder how this 80mm fan cooling down the PSU with that power. Lot easier to do sleeving the extensions than sleeving the PSU cords. So, we`re waiting for some photos
E2180@3,00G + DFI DKP35-T2RS + TRUE 120 + OCZ Reaper 4Gb + WD 6400AAKS + Samsung F3 HD103UJ + ASUS 3870 TOP + LIAN-LI V2000 + CORSAIR HX520
I see, thank you.
Man, that's scary. I can't imagine what would happen should one of those caps blow.
Regards,
Chris
Core i7 920 3931A318 4.4GHz 1.375vcore | EVGA X58 Classified E760 | EVGA GTX470 1280MB | Corsair Dominator GT 7-8-7-20 1688MHz | Heatkiller 3.0 CU and Feser xChanger 480 | Seasonic M12 (Soon to be replaced)
Easter party with tri sli ...
Finally, looks nice, but we want whole photo not only part. Happy Easter to you Malik.
E2180@3,00G + DFI DKP35-T2RS + TRUE 120 + OCZ Reaper 4Gb + WD 6400AAKS + Samsung F3 HD103UJ + ASUS 3870 TOP + LIAN-LI V2000 + CORSAIR HX520
Looks good ! Think about some blue, or white Leds behind the Plexi from the EK GPU Waterblocks
Worklog 1: ★★★ Project: Icebreaker ★★★
Bundymania @Facebook: Come and join me now
Triple (360) Radiator Roundup with 22 Rads !
Swiftech MCP35X Pump Review /// Roundup -> Bay Reservoirs & Laing Tops !
Review: 22 CPU Waterblocks // Review: 4x Tecnofront Reservoirs !
Quad Radiator Roundup - 11 Rads tested
Update: Mora 2 / Mora 3 / Phobya 1080 Xtreme & Supernova 1260
Tubing Comparison: 3/8" & 5/8" from Masterkleer, Primochill, Tygon, Kooolance, Nalgene
That was only for test... after that i decide that tri sli is not so good. Sooo finally i will make 5870 in crossfire with nickel - plexi EK Waterblocks and nickel backplates.
Two 5870's like this soooooon....
( Photo by EK Waterblocks )
Last edited by Malik; 04-03-2010 at 12:04 AM.
Malik,
That tri sli setup was beautiful... can't wait to see how the xfire looks. What fluid were you using... I absolutely love that blue.
can't wait.
Q9550 E0 @3.8 - zalman CNPS9700 NT - GA-EP45-UD3R rev 1.1 - OCZ Reaper 2x2GB DDR2 1066
GTX 285 SSC - Thermaltake Toughpower 850W - Samsung 2220WM 22" LCD - win7 x64
This is feser one uv blue
Malik, did you not like the appearance of tri-sli or did you not like the performance? Just curious.
Hmmm:
Pro:
1. that looks awesome
2. huge kick in benchmarks
Cons:
1. Heat
2. Place in case
3. Not so good performance in games ( i check with bc2, metro 2033, shift, gta4, dirt2, bioshock 2 )
In all this games FPS was high, for example in bc2 was 180fps but ... i observe microstuttering. That is annoying.
In the end i think... tri sli is good for benchmarks etc.
That's why decide change my cards.
More photos from testing tri sli:
Last edited by Malik; 04-04-2010 at 02:24 AM.
Hey your system is very bright...what are you using white cathodes?
Yes, these are white cathodes x 3
Isint the graphic card on the pic a bit bent?
Is normal a bit bent with that heavy block.
Posting Permissions
Reply With Quote
Bookmarks