DimasTech Bench Tables V2.5

[Eldonko]

Heh thanks but I can manage without one.

resend me your address via pm, i'll try to get you a new bag

[TBahre]

any updates on the dual rad version dimas?

[Dimas]

any updates on the dual rad version dimas?

hello, thanks for your update, we had problems with that radiator on right side adding parts, so we decide to give a run of tables with dual sided 3 holes for supporting dual radiators, the PSU is possible to be positioned on the middle of table.

[TBahre]

hello, thanks for your update, we had problems with that radiator on right side adding parts, so we decide to give a run of tables with dual sided 3 holes for supporting dual radiators, the PSU is possible to be positioned on the middle of table.

Sounds good

If I want one of these tables with the dual sided 3 holes how do I go about ordering it? Do I include a note that lets you know what I want when I order from your website?

[Dimas]

Sounds good

If I want one of these tables with the dual sided 3 holes how do I go about ordering it? Do I include a note that lets you know what I want when I order from your website?

there will be a single product, impossible to go wrong

[TBahre]

Thanks for the info dimas! When should I be able to place an order?

[Dimas]

Thanks for the info dimas! When should I be able to place an order?

hello, i think before end of month, need to sort out if there are some more people interested to see how many piece to produce...

[guilleguillaume]

¿So you are still developing that Benchtable that will include the place for a triple rad and on the other side the holes for a dual/triple rad( don't know which are you considering) ?

If that it's affirmative i will be one of the people who are interested in purchasing one of them

Cheers

[Dimas]

¿So you are still developing that Benchtable that will include the place for a triple rad and on the other side the holes for a dual/triple rad( don't know which are you considering) ?

If that it's affirmative i will be one of the people who are interested in purchasing one of them

Cheers

yes, definitively, it will take around 2 weeks, we will post update in this thread

down here, a full PDF manual for Easy V2.5 Complete istallation Guide.

Bench Table Easy V2.5 Manual ITALIAN

english coming later this end of week.

[Smartidiot89]

How's it going with retail availability here in Europe?

[Dimas]

How's it going with retail availability here in Europe?

hello actually AT is having part of our products, next week they will receive the last part...

[Dimas]

english manual ready for Easy V2.5

Bench Table Easy V2.5 Manual ENGLISH/AMERICAN

[Awers]

Interestingly, designed for desktop obudowa.ładne finish. It will be for sale?

[Lunait]

Dimas, do you have any plans to make a smaller version of the benchtable? I really like the design of the Easy table, but it's a bit too big for me at 440 x 455 mm of desk space. Something about the same size as Danger Den's mini torture rack would be perfect, only with Dimastech design (not made of acrylic).

[Dimas]

Interestingly, designed for desktop obudowa.ładne finish. It will be for sale?

please send pm if interested

[Dimas]

Dimas, do you have any plans to make a smaller version of the benchtable? I really like the design of the Easy table, but it's a bit too big for me at 440 x 455 mm of desk space. Something about the same size as Danger Den's mini torture rack would be perfect, only with Dimastech design (not made of acrylic).

we can think about, let's make some render to show...and see if people like
what kind of peripheral you'd like on it? optical? hds? how many?

[Lunait]

we can think about, let's make some render to show...and see if people like
what kind of peripheral you'd like on it? optical? hds? how many?

Maybe 1-2 optical and 3-4 hd? I'm thinking that it could be used for benching on LN2 or air, so it wouldn't need space for a radiator.

[FatAlbert]

I think if it has to be for ln2 or air benchers it don't need more than 1 optical but 3 or 4 hdd (as Lunait wrote)

it could be modified version of hard which is (imo) good idea

[Lunait]

I think if it has to be for ln2 or air benchers it don't need more than 1 optical but 3 or 4 hdd (as Lunait wrote)

Sounds good.

it could be modified version of hard which is (imo) good idea

Maybe. I'd like to be able to fit the PSU, optical and HDDs underneath the motherboard, though, so that it could be used for a "normal" PC (air-cooled) as well as for benching.

[FatAlbert]

yeah, it also is good option!

waiting for first sketches from the Dimas

[xxrabid93]

Hey Dimas. I love your bench tables and am considering getting one, but on your website i couldn't figure out how to get a shipping estimate. Any way you could give me a shipping estimate for the easy v2.5, and for the hard v2.5 (separately b/c the overall price of each probably will make my decision for me) to Naperville, IL 60540, USA.

Also, i too am interested to see this mini table.

[Lunait]

yeah, it also is good option!

waiting for first sketches from the Dimas

I made a render in Solidworks showing how I imagine it to look:

In this render, the bench table is 350 x 300 mm (width x depth). I used a 5.25" support cage only, thinking that you can convert any number of 5.25" slots into 3.5" slots. In the render, I used a hot-swap module to convert two 5.25" into three 3.5", but you get the idea. And there is also an optical drive at the top of the 5.25" cage. What do you think?

[FatAlbert]

I made a render in Solidworks showing how I imagine it to look:
http://i41.tinypic.com/sq4m7m.jpg
In this render, the bench table is 350 x 300 mm (width x depth). I used a 5.25" support cage only, thinking that you can convert any number of 5.25" slots into 3.5" slots. In the render, I used a hot-swap module to convert two 5.25" into three 3.5", but you get the idea. And there is also an optical drive at the top of the 5.25" cage. What do you think?

looks nice, if you can, please post more photos, would be nice with psu and your ideas about hot swap etc as fast as you can

good idea you had there! I think if there will be one 5.25 and rest will be 3.5 would better because one optical is enough for benchers and 4/5 hdd hmm, 01/am3, 03, 05, 06, vantage. That's how I see it and also, on the left side under cpu will be psu right?

sorry for ot dimas, but we are trying to show our vision of the benchtable for overclockers only

edit



ad.1
I think there should hole for 8/4pin power for cpu. space for two plug will be enough (as now all EVGA's boards have it, ASUS REX3)

ad2.

some mounting for fans blow fresh air for the gpus.

[Asmola]

Finally i got my head clear and ordered one Bench/Test Table Hard V2.5 Inox! Cant wait to have it.

Nice job Dimas, keep up good work!

[Lunait]

looks nice, if you can, please post more photos, would nice with psu and your ideas about hot swap etc as fast as you can

good idea you had there! I think if there will be one 5.25 and rest will be 3.5 would better because one optical is enough for benchers and 4/5 hdd hmm, 01/am3, 03, 05, 06, vantage. That's how I see it and also, on the left side under cpu will be psu right?

sorry for ot dimas, but we are trying to show our vision of the benchtable for overclockers only

edit

http://img109.imageshack.us/img109/6428/sq4m7mjpg.jpg

ad.1
I think there should hole for 8/4pin power for cpu. space for two plug will be enough (as now all EVGA's boards have it, ASUS REX3)

ad2.

some mounting for fans blow fresh air for the gpus.

Thanks Yes, the PSU is located below the CPU, to the right of the 5.25" cage. The idea with only using the 5.25" cage was that Dimastech wouldn't have to make a new cage for a combination of 5.25" and 3.5" slots. But if they're making an entire new benchtable anyway, I guess the new cage would just be a small detail. I'll post some more pictures this evening. Fans for the GPU area could be mounted in a similar way as on the Dimastech Easy benchtable. There are thin slits on either side of the motherboard for that purpose: http://www.techpowerup.com/reviews/D...fanholders.jpg (they're not very visible on the GPU side, but they're there)

The hole for 8/4 pin power is a very good idea. I'll add that and post another render tonight.

EDIT: Sorry for hijacking your thread Dimas - we could have the "mini benchtable" discussion in a separate thread if you want.