Quote Originally Posted by zanzabar View Post
i know that u said no cool n quiet but why not use cool n quiet then set the maximum cpu speed to a low percent that will get u 800mhz at 1V-1.04V. but changing the voltage wont change the power consumption, most chips use the same power at 1V or 1.3V though they just adjust the voltage to match the clock speed to not degrade the chip.

in your case though i would recommend to get a kill a watt, then u could see that its futile to try and beat the system that companies spent billions of dollars to get the lowest power state that they could without degrading the chips.
There is someone else that already did an analysis of this.
How is that Voltage does not lower power consumption? The formula was Watts = Amperage * Voltage. Amperage seems to be fixed at a determinated Frequency, and Voltage is... What you set it. This means that the lower the Voltage, the lower the power consumption. The idea is archieve a target Frequency fully stable at the lowest posible Voltage because is pointless anything above that.