Quote Originally Posted by zsamz_ View Post
nice cpu cryptik ? batch
Thanks it's a 3849B018

Quote Originally Posted by Mydog View Post
And Bios vcore.
I don't use LLC. Bios set vcore is 1.37500v

Quote Originally Posted by Dark-Master View Post
Some of bios settings would be great too.
BIOS settings:

vcore = 1.37500
vPLL = 1.81592
Vtt = 1.32500
vdimm = 1.56406v

Skews = Auto


Quote Originally Posted by xpower View Post
Hi extreme people
sorry guys for some nobe questions.....
i had a new system running for a month now.R2E Bios 1639 with 920 Do chip on stock HSF,volts etc.first of all with the ambient temp of 32 the cores are 40 38 41 37 on idle with core temp 0.99.5 reading.why is so much difference in between cores,first week and a half the difference was not so much,but now after one and a half month of using the differene is more noticable. is it normal? i notice the Mother Board is little bend on top where the top HS for mosfets.i used lots of asus MB,last one had same problem it bend where the cpu is and on top like this one. did any one had bend problem.is it because all MB are made in china sh**t.this board is in Antec P160 case.
sorry for my bad english.
The temp sensors within the CPU aren't accurate until the temperature approaches Tjmax, so some variation between them, especially at idle, is in my opinion normal. Once it gets up to 50 - 60*C, they should be closer together. If they're not you can always adjust the readings in RealTemp.

Mounting the heatsinks on the boards can cause warping, but when bolted into a case it will be flat so I wouldn't be concerned.