ok all you OC'ers im finaly working on a OC on this new mobo,(ga-ep45-ud3p) i got it running 3.83ghz with next to no major adjustments. but trying to take it to 4.03ghz it wont pass more than half mem used in IBT. here is a shot of what i have set in my bios.
Motherboard Voltage Control
Voltage Type.………... Manual
CPU
Load Line Calibration......................
isabled
CPU Vcore….…….1.27500V...........:1.325v
CPU Termination…..... 1.200V*........:1.200V .................This needs to be increased the higher you raise the FSB, you need about 1.30
CPU PLL……………….1.500V*.......: 1.500V ................I would bump this up to about 1.57
CPU Referennce.……...0.760V*.......: .760
MCH/ICH
MCH Core……………...1.100V.........:1.22V ....................This will need more too, about 1.28 or around there.
MCH Reference….…….0.760V.........:Auto
MCH/DRAM Ref.…......0.900V..........:Auto
ICH I/O…………….....1.500V............:1.50
ICH Core…………...…1.100V............:1.100V
DRAM
DRAM Voltage ……....2.100V..........:2.100V
DRAM Termination .…0.900V...........:Auto
Channel A Reference 0.900V............:Auto
Channel B Reference 0.900V............:Auto
Advanced Settings
Limit CPUID Max. to 3.....................: Disabled
No-Execute Memory Protect.................: Enabled
CPU Enhanced Halt (C1E)...................: Disabled
C2/C2E State Support......................: Disabled
x C4/C4E State Support....................: Disabled
CPU Thermal Monitor 2(TM2) ...............: Enabled
CPU EIST Function.........................: Disabled
Virtualization Technology.................: Disabled
any help would be greatly appreciated. thanks..
Originally Posted by cincyrob
ok all you OC'ers im finaly working on a OC on this new mobo,(ga-ep45-ud3p) i got it running 3.83ghz with next to no major adjustments. but trying to take it to 4.03ghz it wont pass more than half mem used in IBT. here is a shot of what i have set in my bios.
Reply With Quote
Bookmarks