MA790X / MA790XT-UD4P 790X bugs fixes etc etc.....

[gOtVoltage]

You Should be fine..


If you press Control F1 you get More Options under the PCI-E setting..you can forcr 16x and 4x if i remeber..

If you use 8x it will force Both Slots 8x...

This Means if you Set the Second to The Raid Card for 8x your Ghraffics will be *x ..

You will not see a bottle neck with the GTX and that Raid card..You just cant Xfire now

790X UD4P DDR2 .......BIOS F9......

After running F8 for awhile i decided to try F9 again..

I Now can use Cas 7-7-7-20 timing on 1066 divder.. before in F8 it would not like to run cas7 for Higher freqencies..it would lock on boot or do other wierd stuff...Seems Giga tweaked the Ram timing in Bios a lot better.. I didnt notice this the first time i tried F9.. Im actually liking this Bios ,, a little more despite its low HTT Ceiling...

I can easily run 620 @ 7-7-7 @ 6-6-6 @ 5-5-5
where on all Previose Bioses this was very diffacult to run 590/600 on the 1066 divider using the Same Ram in all Bioses.

I also Noticed F9 uses less Volts...
F8 needed 1.56v for CPU and 1.375v nb vs F9@ 1.538v and NB 1.32v
Last week F9 was buggy..This week ill share my beer with it.