Asus M3A32-MVP Deluxe (790FX) *Pictures + Benchmarks + Overclocking*

[funkflix]

A second HD5770 shouldn't be a problem for your PSU.

[tbone8ty]

thanks funkflix

[felix_w]

got 4 sticks of 1066 working but only @ 1000 mhz...

Are the timings those in your sig ? I think you might wanna try to loosen that "22" and make it 25-26 or a little bit more to reach 1066Mhz...I'm using 4 sticks of 2GB at 1066MHz also, but 5-5-5-15-26 and runs just fine...At 25 i had rare bsods, so i changed it...

[stafunzl]

Hey,
I have mb m3a32 mpv deluxe with x3 720 be and 4x1gb hyperx running at 800mhz-unganged mode (org. ram is 1066mhz),my cooling is asus silent square pro..

Now i am running stable at 3.4ghz (200x17-- 1.5V), so can i go higher? can i overclock ram speed to 1066?

Anybody who have the same hardware?

Have fun

[SkullCracka]

if your ram can do 1066 go into bios goto ram setting set it to manual 1066 2t enabled auto for timings till you see if your ram is capable. then you can tighten them up to like 5-5-5-12-28 @ 1066 check your ram for voltage at that speed.

[QuietIce]

Hey,
I have mb m3a32 mpv deluxe with x3 720 be and 4x1gb hyperx running at 800mhz-unganged mode (org. ram is 1066mhz),my cooling is asus silent square pro..

Now i am running stable at 3.4ghz (200x17-- 1.5V), so can i go higher? can i overclock ram speed to 1066?

Anybody who have the same hardware?

Have fun

Do you really need that much vCore for 3.4 GHz?

What's your cpuNB voltage setting and how fast are you running the cpuNB ...?

[stafunzl]

I change settings now they are:
13.5x250@3375mhz
vcore: 1.5
NB: 1.4
Now my ram is running at 1000mhz and system is stable.

[QuietIce]

That still seems like a lot of voltage. My 940BE is running 3525 (235x15) @ 1.36v with a cpuNB of 2350 MHz @ 1.225v ...

[SkullCracka]

[QuietIce]

LOL! And I've heard some people say the SB600 holds us back from a good OC! Ha!


BTW - What's the NB running on that OC ...?

[SkullCracka]

http://valid.canardpc.com/show_oc.php?id=1012507 ht @ 2600 @ auto volts, nb 2800 @ 1.3v

[QuietIce]

cpuNB 2800 MHz @ 1.3v ain't half bad!



I wish CPU-Z recorded that information ... *sigh*

[felix_w]

http://valid.canardpc.com/show_oc.php?id=1012507 ht @ 2600 nb@ auto volts 2800 @ 1.3v

How high is CPU-NB voltage at Auto for your processor?

[SkullCracka]

not sure got rid of AOD. think i might need to bump the volts up another .05 on cpu and nb had a bsod before i left the house this morning. only had it in the system for 6 days.

[felix_w]

not sure got rid of AOD. think i might need to bump the volts up another .05 on cpu and nb had a bsod before i left the house this morning. only had it in the system for 6 days.

You can always check from K10stat, or even change from there too...

[SkullCracka]

whats k10stat? lol

[SkullCracka]

gotta go talk to my friend google dont know what k10stat is LOL

here we go thanks will try this program tonight. http://aspiregemstone.blogspot.com/2...processor.html

[SkullCracka]

http://valid.canardpc.com/show_oc.php?id=1013775 << hows this

[SkullCracka]

http://valid.canardpc.com/show_oc.php?id=1021745

[SkullCracka]

ah yes like a co0l co0l co0l breeze

[QuietIce]

Nice!

[tbone8ty]

so what driver should I be using if I wanted to install a SSD on this sb600?

select AHCI in bios or should i run in on the marvell chip or sb600 chip?

looking to setup a 80g intel g2 ssd...

whats steps should i take before install Win7?

ie. firmware update and aligning drive?

[felix_w]

Set AHCI on SB600, align, install using raid driver disk from ASUS site and then force to install latest Raid driver from AMD.

You can also increase your SB voltage a bit (up to 1.25) to get proper performance.

[tbone8ty]

so i re-installed win7 home and theres an unknown device

ati I/O communications processor LPC

i cant seem to figure out which driver to use for this

help

[felix_w]

Is it this one :

Name: ATI I/O Communications Processor LPC Controller
Device ID: PCI\VEN_1002&DEV_4377&SUBSYS_009F1025&REV_80\3&13C 0B0C5&1&A3

?