** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[stasio]

F10j, which mobo?

[andressergio]

can i get f10j bios from someone? I cant seem to find it anywhere

gimme your mail on pm i send

Cheers
Sergio

[andressergio]

I have only B09.1120.1

BIOS F8c is latest atm....

Thanks Stasio i have the CD that came with the giga but happened the same when i first installed worked fine then after some days i got an error and closes...i re installed and same .... also hoss31 sent me that same version but as i told you its not working i installed that one you have

Cheers and thanks

Thanks Hoss for sending

[stasio]

OK,bro.
Btw,BIOS F10j I found on JZelectronic (01.Dec 09).

[Rattle]

thank you guys

[LoneWolf]

I wonder if the EP45T-UD3P is ever going to get a BIOS update :/

I wonder if the EP45-UD3P (1.0, 1.1) BIOS will ever come out of f10.f beta and finally become a full release.

Just bought a Q9450 this afternoon for $150, and sold my Q6600 for $120 this evening. It's a modest, but nonetheless noticeable boost, and I'm happy to be using less power.

OK,bro.
Btw,BIOS F10j I found on JZelectronic (01.Dec 09).

So they are actually continuing work on F10, then? Good to know, since 10f is the most recent on the US site, and that's dated August of `09.

[stasio]

So they are actually continuing work on F10, then? Good to know, since 10f is the most recent on the US site, and that's dated August of `09.

Latest for UD3P is BIOS F10k.
-new feature "Quick Boot"
-released on 13.Jan 2010

[vailr]

can i get f10j bios from someone? I cant seem to find it anywhere

GA-EP45-UD3P rev 1.0/1.1
F10k:
http://www.station-drivers.com/page/...-ep45-ud3p.htm

[andressergio]

wasnt F10K kinda buggy reported ???

[stasio]

wasnt F10K kinda buggy reported ???

According to JZelectronic:
Info: Successfully flashed
Fix: LAN (Code10) for Quick Boot in the cold

[andressergio]

According to JZelectronic:
Info: Successfully flashed
Fix: LAN (Code10) for Quick Boot in the cold

ah i read in other forums "stay away from this one..." tough i never had that LAN probelm...will give a try then

Cheers
Sergio

[vailr]

GIGABYTE
EasyTune 6
utilitaire
B10.0130.1
http://www.gigabyte.com.tw/Support/M...lity&FileID=86

[andressergio]

GIGABYTE
EasyTune 6
utilitaire
B10.0130.1
http://www.gigabyte.com.tw/Support/M...lity&FileID=86

for us P45 users this newer version no only load slow but in my case i hit apply and get instant freeze...

[RAMMAN]

you know what, i was so busy using 475fsb 24/7 i never attempted to go higher.

480x7 = 1024k orthos passed

485x7 = 1024k orthos passed

490x7 = locked up 1 minute 55 seconds into orthos blend

still 1.3 vtt 1.24 mch 2.2 vdimm

it was an unusually cold day so my 24/7 setting remains 475x7

[techguy2k5]

Could anyone offer some advice on o/cing an E5200 on a UD3L? I used to have this thing @ 3.33GHz on stock cooling with a slight Vcore bump on an EP35-DS3L, but that board had a failed BIOS flash and I replaced it with this board. I've tried the stock multi and 9.5x.

Edit: spoke too soon. 12.5x272 (3.4GHz) @ 1.275V works, no other voltages adjusted.

[RAMMAN]

this is my new 24/7 setting, passed 1 and a half hours orthos before i got impatient and stopped it.



1.3 vtt 1.24 mch 2.2 vdimm

485 fsb also passes 1024k orthos but im sticking to 480 fsb for guaranteed stability in games. besides cant complain about 10k write and copy

490 fsb locks up after a couple minutes orthos blend but thats to be expected

[vailr]

GA-EP45-UD3P rev 1.0/1.1 - Bios F10 (Final)
http://www.station-drivers.com/page/...-ep45-ud3p.htm

[redrumy3]

finally F10 final version, will update in a few

[The Viper]

heh guys whats the current best DDR2 kits you can buy for overclocking. I was just checking out Newegg and there seems to be alot of new kits I have never seen before, and some of the other ones I thought were real good are no longer there.

My OCZ Plat LV RAM needed to be RMAd and now they are sending me regular Platinum

[MrDucky]

get ur selfs ome OCZ Blades 1200 MHz they are 1300 + Cappable

[The Viper]

get ur selfs ome OCZ Blades 1200 MHz they are 1300 + Cappable

Yeah that would be great if their was a store that sold them , not to mention all OCZ LV DDR2 sticks are EOL.

[In-Fluence]

G.Skill PIs FTW!

Failing that you could get some Tridents which will do over 1200 as well.

The ripjaws are another option, but with rather naff 6-6-6-18 timings.

I think most manufacturer's have quit the DDR2 PC9600 game, which leaves us with very little choice.

[MrDucky]

Ebay ?

Yeah that would be great if their was a store that sold them , not to mention all OCZ LV DDR2 sticks are EOL.

[NoGuru]

Finally got my account activated. So hi, I have an EP45-UD3P. Had an E8400 but just sold it. Was a nice chip, this was on air, http://valid.canardpc.com/show_oc.php?id=958902
Now just waiting on my E8700 for some air cooled action.

[RAMMAN]

weird, board passes orthos blend at 480fsb yet if i was to play tf2 for a while, quit the match then suddenly start up a new server it will crash to desktop and come up with an error about memory unable to be read. imo thats an mch error, happens at 450fsb too just not as often. only certain fix is to lower fsb to 425. i guess the mch cant handle the stress of the high temps caused by gaming combined with having to load a tf2 map.