G.SKILL PIS F3-17600CL7D-4GBPIS 2200 7-10-10-28 1.65V P55 Series

[hiwa]

hiwa, very nice result my friend !!!

Did you try it in single channel mode ?

thanks dude
no still don't test single mode
cl10 and 9 is same on this kit 2850 is the IMC limit not mem

[hiwa]

2800 9-10-9-28 1.80 B2B disable 1.80

[zsamz_]

Hiwa is it possible to test on REX?
tks
edit: i got a set commin in we shall find out soon

[trans am]

Don't make a bad move like what I did........got myself an i3 530
I didn't spend much time playing with the rams yet........
but so far I only managed to go up to 1820cl8 on MSI GD65

***need to find myself a better cpu.......any recommendations ***

I dont think its the i530. I think its i530 on that pos board. gd65 is good for lynn

chuck that gd65 in the trash and do do yourself a favor and get a ud6 or cheap biostar h55 board. clarksdale is crap on gd65 eveb with the beta bios. 1.73/1.72 etc.
I couldnt get mine past 200 blck. maybe you get lucky. I have 2 kits of evo cas 7 and on ud6 atm. what bios is the best for clarks and evo on ud6? im on f7 bios.

[XII]

Did anyone try these kits in Tri-channel already?

Have seen a 1600 Tri-kit.
No review yet.

[dro]

gd65+i5 750 works perfectly with these rams though

I am definitely looking for a better board, but in the near future

So far I dont see any clarkdale doing crazy ram speeds
Any comments on that?


***please excuse my english ***

[trans am]

gd65+i5 750 works perfectly with these rams though

I am definitely looking for a better board, but in the near future

So far I dont see any clarkdale doing crazy ram speeds
Any comments on that?


***please excuse my english ***

youre english is excellent my friend. No apology needed. I need you guys to all know I went from the elpida high v stuff from last year on x48/rampage extreme to AMD am2 during the summer during the whole "hey look amd can oc really high again (x2 550be 965c3 etc. buzz) then I found out the hard way that sb750 just sucks for anything else. raid performance /ram / etc etc. I just got back into intel about a month ago and sold all my amd crap except the 5850
now my 1st reunion with intel has all been clarks on p55 and i get the h55 boards on monday. the only kit after I sold all the d9 and elpida kits are only these evo cas 7 kits. I need to get some a good decent 2x2gb kit that worked like d9 did on core2. what should I be looking at? no offence but 9- and 10 timings regardless of speed at $300 for a 2x2 kit doesnt sound groundbreaking. maybe im old fashioned and thinking back to bh5 days and good d9 kits. am I missing something here? do ram companies just keep laxing the timings and programming the spd at higher speeds and throwing a fan and some useless heatspreaders on the kits and sell them for 300 bux now? this is getting outta control. I know it takes time and money to bin these but there needs to be a point when you just have a kit that does it all and let the end user bin them and try to get the best out of them. thats what most of us are looking for. just buy a bunch of good ics that do it all and get a good deal on them and pass the savings to the end user buy a crap load of them and start with some settings to start out at 8-8-8- 2000 1.6v or something close to that. make a thread on your gskill site that shows different cas / and speed combos and how to get the best from it. marketing is great and all and youre in this to make money but is this really necessary? I'm sorry, I dont mean to rain on anyones parade and we all work hard and the gskill guys are very nice guys. I just think we need to go back to the basics.

[zsamz_]

best kit i've had so far doin 1928mhz 6-8-6-24 stable on rampage extreme
gonna test on evga p55 ftw soon

[George_o/c]

4GB @ 960MHz CAS6 stable on REX is breathtaking, great kit dude!
How about CAS7, can it do more than ~1060MHz ?

[zsamz_]

4GB @ 960MHz CAS6 stable on REX is breathtaking, great kit dude!
How about CAS7, can it do more than ~1060MHz ?

cas 6 or 7 is 970mhz
cas8 i'm good for 1040 so far i hit the wall @ 1045
my kit doesnt like cas9
makes me wonder how high they will go on p55
after 10+ sets of ram i finally got 2000mhz+ stable

[LinkinParkBoy]

Gskill Powa

[Don_Dan]

best kit i've had so far doin 1928mhz 6-8-6-24 stable on rampage extreme
gonna test on evga p55 ftw soon

That's a great clock, can you post some Everest shots please?

[zsamz_]

That's a great clock, can you post some Everest shots please?

i only hit 12k in everest and 42 latency i'm too ashamed to post it
you know ive done 12k with ddr2
but cas6 feels fast
on evga ftw i gettin big blue bomber after 2100

[zsamz_]

only 2:12 divider workin with evga ftw wirth this kit?
am i setting vtt too low @ 1.32
i can run 2200 cas7 @ 183blk
but no go @ 200blk @ 2000mhz lol
i can pass memtest even @ 2300 cas7 but anything other than 2:12 diverder i get blue monster
well i got her runnin 2344 cas9 for now
but u rather do 2100 cas7 lol

[dro]

Unless you can get 2:12 ........ there's not much fun with this kit
Well at least for a noob like me

[Don_Dan]

i only hit 12k in everest and 42 latency i'm too ashamed to post it
you know ive done 12k with ddr2
but cas6 feels fast
on evga ftw i gettin big blue bomber after 2100

Of course I remember your 12k, but 12k with DDR3 is just... wrong.

I will be on REX soon, then I'll challenge your bandwidth scores again.

[zsamz_]

Of course I remember your 12k, but 12k with DDR3 is just... wrong.

I will be on REX soon, then I'll challenge your bandwidth scores again.

on rex i think i did around 13k
get 12k on ddr2 first
shame i dont have much time to play with rex cause of my 920 and 860
my rex gonna go to a new home soon
i might have to do a 640+fsb run

[basco]

@zsamz_
i got similar prob on asusp55ws with i7 750 but with cpu-multi.
with multi 21 no go above 1920mhz(no matter cl)
with multi 19 = ok

but i think you already tried everything

[zsamz_]

@zsamz_
i got similar prob on asusp55ws with i7 750 but with cpu-multi.
with multi 21 no go above 1920mhz(no matter cl)
with multi 19 = ok

but i think you already tried everything

i know the memory can do 2300 cas7 but not on 2:12 well i havent gone higher than 1.65 yet
i think i gonna put the set on rex cause its a waste on p55 with 2:12 when any other set i gave gives better results with other dividers
hopefully i get some time off to play soon

[Don_Dan]

on rex i think i did around 13k
get 12k on ddr2 first

I will try it, but you know, it's not that easy on the Gigabyte.
But I'll test my REX first, I need to produce some numbers for the team.

[zsamz_]

I will try it, but you know, it's not that easy on the Gigabyte.
But I'll test my REX first, I need to produce some numbers for the team.

gigabut cant do dfi job
you gonna need 620fsb

[maximmax]

New pics up


I think im going to stop with this RAM until MSI can provide a better-supporting BIOS. I get the nagging feeling im doing something wrong and G.Skill deserve better than an "irrelevant" review because I can only run the kit out-of-warranty

[zsamz_]

New pics up


I think im going to stop with this RAM until MSI can provide a better-supporting BIOS. I get the nagging feeling im doing something wrong and G.Skill deserve better than an "irrelevant" review because I can only run the kit out-of-warranty

i had to abuse the memory to get it runnin right
after a few weeks on rampage extreme @ 1900mhz 6-9-8-22 now i can use 5:1 divider on p55 ftw for some sweet bandwidth
before that i was stuk on 12:1

[LagunaX]

$189.99 free shipping now @ the Egg:
http://www.newegg.com/Product/Produc...-322-_-Product

[cdnbum88]

Will these work effectively on an AMD platform?