Quote Originally Posted by Amurtigress View Post
Hi folks,

I just bought me the UD7 two days ago, and actually expected to find it harder to overclock my 920 C0 to 3.8 GHz as on my previous P6T Del. V2...

Same settings, same overclock. Rockstable so far. The only irritating detail of the Gigabyte BIOS seems to be that is is less cleaned up than ASUS, and that you can set the uncore clock to less than 2x memory clock...which simply doesn't work.

I am kind of glad to have this board, after having used ASUS boards for 15 years...ever since the times of 486 machines!

CPU: 920 C0 @ 21x181, VCore: 1.275V, Vtt/QPI: 1.455V, Zalman 9900
Memory: 3x2GB Corsair XMS 3 1600 CL7, 1.66V, 1810 MHz (8-8-8-20-1T)
Graphics: Gainward GTX275@700MHz/1485MHz
OS: Win7 Ultimate x64
Board: GA-X58A-UD7


Can anyone confirm if I am understanding this correctly.
I have found it is impossible to get may ram stable with anything other then the 8x multiplier, and I think this may be the cause. So if I use a 10x 200BCLK then I have to make sure my UNCORE is at least 4000Hz. I didn't realize this was the case, but it makes sense.