-
Sam oslo: I haven't run into any problems going back to the original bios so far. I run the chip at 4.4ghz 24/7, passed LinX and some custom blend. After flashing to the last beta bios it would not pass with the same load vcore-1.424v. I bumped it up a couple notches and passed at 1.440v load, but still was not consistent even with good temps, sometimes it will still fail at 10 passes then the next time 18 passes, I tried 2 different kits of memory so I think I can rule that out. I flashed the bios back and haven't had anymore stability issues at 1.424vcore load. I normally don't use this much vcore for 24/7 use but Intel spec says 1.55 absolute max. I would rather use higher vcore than keep buying new chips to find a golden one, newer 32nm chips will be out soon anyway.
Last edited by OC Nub; 02-04-2010 at 07:28 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote
Bookmarks