UnOfficial EVGA X58 Classified Owners Thread

[pushook]

Hi @all

I´ve running my Board with an I7 920 @ 215x20 Ton an HToff. Is it normaly to set the VTT @ +300mv to get it stable to small FFT with Prime?

I get freezes after seconds, if I go below +300mv! Or is it something else to adjust to get stable?

Temps on Vreg and NB are under 60° loaded.

Frequency Control
CPU Clock Ratio ( )
CPU Host Frequency (Mhz) ( )
MCH Strap (auto )
CPU Uncore Frequency (Mhz) (3445x16 )
CPU Clock Skew (0)
Spread Spectrum (disabled )
PCIE Frequency (Mhz) (103 )

EVGA VDroop Control (without )
CPU VCore (1.45 )
CPU VTT Voltage (+300 )
CPU PLL VCore (1.86 )
**IOH PLL VCore (auto )
DIMM Voltage (1.63 )
DIMM DQ Vref (auto)
QPI PLL VCore (auto )
IOH VCore (1.2 )
IOH/ICH I/O Voltage (1.625)
**BR04 ( NF200) Voltage ( )
**VTT PWM Frequency (610 )
**CPU PWM Frequency (1333 )
**CPU Impedance ( )
**QPI Signal Compensation ( )
ICH VCore (1.32 )
*PWM Frequency ( )

cheers push