Thanks for the reply KingOfsorroW. As owner of Asus P6T7, how does it overclock? With W3520 CPU and on water, is it possible to get for example; a 4.5 GHz easily with decent temps and Vcore? There is one thing holds me back about P6T7. There are no full waterblocks available for board.
If I go with E760 Classy, how will the PCI lanes be shared? There will be 3 GTX285 and 1 PCI Sound card. 16x/8x/8x and 1x?
Last edited by GTi-6; 12-28-2009 at 11:39 AM.
Yeah, there are no waterblocks that I know of for this mobo, but at the same time I wouldn't say you would need one - it's known for its very efficient passive cooling heatsinks setup... I, personally don't need a waterblock - the heatsinks in my system are not getting hot, and some of them are barely warm during operation. But you have to have a good air circulation inside the case for the heatsinks to be that efficient. I do - so the result is like I say.Originally Posted by GTi-6
About the lanes: as far as I undrstand, the classified only supports only 2 lanes x16. And if you run tri sli as you are planning to do, you will only have 8x 8x 8x and I don't know about the forth one. Whilst the supercomupter supports 7x16 no matter what you have installed...
i7 950@4.05Ghz HeatKiller 3.0
EVGA E762 EK WB | 12Gb OCZ3X1600LV6GK
Razer Tarantula |Razer Imperator | SB X-Fi PCIe
480GTX Tri SLi EK WBs | HAF X | Corsair AX1200
____________________________________________
Loop1: Double_MCP655(EK Dual Top) - MoRa3Pro_4x180 - HK3.0 - EKFB_E762
Loop2: Koolance_MCP655(EK Top) - HWLabsSR1_360 - EK_FC480GTX(3x)
Well you won't get 7x16 all the time. You will be able to get 4x16. I have included the specs below but I ordered one of the p6t7 because with the beta bios it seems to be a winner with that many PCIE, minus the slight latency increase.
3 x PCIe 2.0 x16 (@ x16 or x8)
3 x PCIe 2.0 x16 (@ x8)
1 x PCIe 2.0 x16 (@ x16)
*4 x PCIe 2.0 x16 or 7 x PCIe 2.0 ( 6:@x8, 1:@x16)
Amd 64 3200
Chaintech ZNF3-150
2x256 Mushkin PC3500 lvl 2
2 WD Raptor raid lvl 0
Asus 9800xt w/ dual 15cfm delta
Mach II w/ 64/fx kit
PC Power & Cooling 510watt Deluxe
CorrectOnly 4x16 and 3x8 while your at it
as per the manual:
http://support.asus.com/download/dow..._type=12&os=30
Just make sure you don't use any of the black slots, so that you don't loose that 4x16 combination of the blue slots.
i7 950@4.05Ghz HeatKiller 3.0
EVGA E762 EK WB | 12Gb OCZ3X1600LV6GK
Razer Tarantula |Razer Imperator | SB X-Fi PCIe
480GTX Tri SLi EK WBs | HAF X | Corsair AX1200
____________________________________________
Loop1: Double_MCP655(EK Dual Top) - MoRa3Pro_4x180 - HK3.0 - EKFB_E762
Loop2: Koolance_MCP655(EK Top) - HWLabsSR1_360 - EK_FC480GTX(3x)
Either way, still this board fits right in with XS. Some might not like the latency but the PCIe alone...
Amd 64 3200
Chaintech ZNF3-150
2x256 Mushkin PC3500 lvl 2
2 WD Raptor raid lvl 0
Asus 9800xt w/ dual 15cfm delta
Mach II w/ 64/fx kit
PC Power & Cooling 510watt Deluxe
Well Xmas was good P6T7, 3550 and 6gb of Patriot PC16000 ram. Board booted right up with BIOS 210, but complained about the cpu and I got a little worried when I saw 800 and 1066 settings only with a locked multiplier. Flashed to 504 with a nice assortment of memory settings and the CPU Turbo Power Limit setting, feeling better.
Sitting flat on my desk on the static bag, board was hot near 50c MB and 60c CPU (Stock Cooler & TIM), metal over the controller area was hot to the touch. Elevating the MB about a half inch, turning HT off and placing a small house fan on low near it brought the temps to 33c MB, 45c CPU with the metal still warm but reasonable. Hopefully will do a little better once the board is vertical.
Both video cables in the box were for green cards.
The CPU water block I ordered will be there when I get home from work and with four days off should have a pretty good idea of how the parts are going to work together.
Last edited by Aleslammer; 12-30-2009 at 10:33 AM. Reason: Editing
Asus RE
Q6700
Crucial PC3 16000 4x1
2 x 4890
WD1600AAJS
Sound was in the MB box.
Bios 0507 with Gulftown Support in da House
I'll contact Duniek and ask ... or if you happen to read this post Mike: PLEASE, PLEASE can we show "it" off now?
Agenda: I have 0 projects prioritized for the year, 0 in progress this month, 0 this week, and 0 as of this moment.
Current primary function: traveling.
xaxis, it's finally here, I guess. Wow, that waterblock looks great. I was going to buy E760 Classy but with an available waterblock, maybe I should go with P6T7.
http://www.xtremesystems.org/forums/...37#post4177337
Last edited by GTi-6; 01-02-2010 at 07:09 AM.
Yeah, I've had the pictures for a few days but was instructed not to post them yet, for some minor details needed attention... But indeed, it's beautiful! I can't wait to get home and finally finish working on my supercomputer liquid cooling monster!
Agenda: I have 0 projects prioritized for the year, 0 in progress this month, 0 this week, and 0 as of this moment.
Current primary function: traveling.
I saw that picture on Duniek's Liquid Cooling Worklog 1.0 thread. I edited my post. I left a link to Duniek's thread.
Yeah, I've had the pictures for a few days but was instructed not to post them yet, for some minor details needed attention... But indeed, it's beautiful! I can't wait to get home and finally finish working on my supercomputer liquid cooling monster!
Last edited by GTi-6; 01-02-2010 at 07:22 AM.
I do, but it's majorly on hold due to my current ... well location/occupation. Also, many of the intended components (EVGA x58... blocks, 3xgtx285s, i7 975 Extreme, etc, etc) went into another system for I had to hugely "remodel" an MM Ascension case: Needed a new custom 10 pci slot opening back panel for the (at least 4 5970s (hopefully 6 or 7) - mind you I'm not a gamer: system intent would half be for my own programming experimentation and the other half would be to smear the "Fastra II Project's" tomography application all over the digital road of computational power bragging rights.
Project Illuminated (on hold)
Agenda: I have 0 projects prioritized for the year, 0 in progress this month, 0 this week, and 0 as of this moment.
Current primary function: traveling.
Hello,sir,where is it?I can't found it @ Asus web,can post the link for me? BTW,anybody can give me info for the X5550 on this board?I try it on this board,but totally can't overclock it,very sad.
Thx,sir.I am able to tweak my X5550 to 20 x180 @ 3.6G,but the ram is locked @ 14xx,too sad.Anybody here can feed back to Asus release new bios for break the BCLK wall?more than BCLK 180 will be cheksum error.
Read all the way through this post and it finally put the nail in the coffin on the Classified I was considering over the P6T7. I have one of these on the way along with an i7 920 and it should be here later this week. I am looking forward to it. For the price compared to the E760 Classified this seemed like the better bet for me. I have no use for all these PCI-E slots....yet. Probably never will. My idea behind getting this was it gives me a good platform to upgrade on for 3-4 years. I went 2 years on my trusty 780i so I see no reason this can't give me that kind of longevity. I really just like the idea of having as many full bandwidth PCI-E slots as possible. Now where are any good overclocking guides that pertain to this board....or are the standard ones sufficient for this? I can overclock a Core2 quite easily but this one seems like its going to take some learning.
Thanks.
Last edited by mjohns930; 01-09-2010 at 06:22 PM.
Up,just bring up this thread.Don't let it fall down too deep.
Can someone reupload this bios?
has anyone gotten 6 sticks of ddr3 2000mhz to run on this board? I can't get it to work stable... Runs fine at ~1600mhz.
Xeon W3520 @ 4.0Ghz ~ 3x 7970 ~ 12GB DDR3 ~ Dell U2711
Well I finally got it in and got everything together. I am really pleased with this board. Its hot but that was expected. I have it in an NZXT Tempest EVO so that keeps everything in check. Just playing around here the last day or so I managed 4.2ghz on my i7 920 with little effort and it seems like there is room for more. Now it just needs something more than my 9800GTX's....
post your bios settings?
Xeon W3520 @ 4.0Ghz ~ 3x 7970 ~ 12GB DDR3 ~ Dell U2711
I would post them but my board took a turn for the worst...one of the ethernet ports was not working. I was only using one and then I decided to start testing all the components to make sure nothing was dead. So I have since sent the board back for a replacement. I do remember I was somewhere around 1.3 vcore but thats all I remember off the top of my head. Sorry.
Up,just bring up this thread.Don't let it fall down too deep.
Could anyone post something about 0507 bios stability?
Asus RIVBE, 4930K, 4x4GB Team Xtreem 2600 CL10, EVGA 780Ti Classy SLI, Creative ZxR, Samsung 840 Pro 256 (Win8.1), Crucial M4 512, Seagate 7200.14 2TB & 2TB Green, Pioneer BDR-207EBK, Antec HCP 1300, Silverstone TJ11.
RL -- EK Rampage Black Monoblock Clean Ac-Ni, 2xEK 780Ti Classy Ac-Ni&Backplate, Koolance 452x2 Rev. 2, 2xEK D5 PWM, AC UT60 480&240&120, 9xNB-Eloop, Lamptron FC5V3...
@Onkyo A-9000R -- 2xMonitor Audio GX300 (Wireworld Solstice 7)
@Onkyo 5009 -- Kef XQ50C, 2xKef XQ10, Rel R-205 Sub
@Panasonic P60ZT60E
+1 for another 0507 share.
Posting Permissions
Reply With Quote
Bookmarks