-
Please help!!! Can someone help me overclock my i7 over 4.5 stable. This is current setting... are they right? Thanks (sorry if i didnt post it in the right place) new to this.
MB-ASUS RAMPAGE EXTREME2
CPU- I7 920
RAM-CORSAIR 3X2GB 1600 CAS 8
CPU COOLER- SWIFTECT WATER COOLING
VGA- ATI HD 5770
PSU-CORSAIR 1000W
HDD- WD VelociRaptor 300GB AND Seagate 7200 1TB
REAL TEMP 3.40
4209MHZ 200X21
44 41 43 39
AI overclock - manual
OC from CPU level up - auto
OC from Memory level up - auto
CPU Ratio setting - auto
CPU configuration auto
CPU Ratio Setting - auto
C1E Support - disable
Hardware prefetcher - enable
Adjacent Cache line prefetcher - enable
Intel Virtualization tech - disabled
CPU TM Function - disable
Execute Disabled bit - disabled
Intel HT Technology - enabled
Active Processor Cores - all
A20M - disabled
Intel Speedstep tech - enable
Intel Turbo Mode tech - enable
Intel C-STATE tech - disabled
BCLK frequency - 200
PCIE frequency - 100
DRAM frequency - DDR3 1601MHz
UCLK frequency - auto
QPI frequency - auto or
Dram timing control
1st iformation - 8-8-8-24 - 1T
2nd information - auto
3rd information - auto
EPU II phase control - full phase
Load-line calibration - enable
CPU differential amplitude - auto or manuel values
Extreme OV - disabled or enable
Current voltage 1.455 1.812 1.376
Cpu voltage - 1.44375
CPU PLL voltage - auto
QPI-Dram voltage - auto
Current voltage 1.131v - 1.508v - 1.111v - 1.508v
IOH voltage - auto
IOH PCIE voltage - auto
ICH voltage- auto
ICH PCIE voltage - auto
Current voltage 1.64-68
DRAM Bus voltage - 1.65
DRAM REF voltage - auto
Debug mode - string
Keyboard TeakIt comtrol -disabled
CPU spread spectrum - disabled
PCIE spectrum - disabled
CPU clock skew - auto
IOH clock skew - auto
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks