LSI 9260-4i / 8i fw / bios help needed

[trans am]

you have to take out ur drivers from the ichxr and boot with LSI as 1rst boot device leave only CD/DVD enable (and put the cd(LSI) in the drive)

Oh man ae you telling me steve hasn't made it into the damn webbios yet? You're in for a fun time. I've finally decided after 3 win7 installs and random reboots after the fact. its either I need to wipe these ssds and start fresh or its my mobo. I wanted to get the new gigagyte GA-790FXTA-UD5 since I heard about it so I went ahead and ordered it today.
http://www.newegg.com/Product/Produc...82E16813128415
it should be here in nyc tomorrow if it ships from the nj warehouse. In the meantime I'm going to wipe these ssds clean and then pull the board off so I'm all set.

@ steve. go here: http://www.lsi.com/DistributionSyste..._SAS_SW_UG.pdf

like turd says you need to set your mobo bios sata settings to native IDE and reboot then DEL to bios again and switch your drive priority to the raid controller. Then you can hit the ctrlH to get into the webios when it prompts you.

go straight to chapter 4 and start reading. follow the steps carefully. start with "New Configuration": Clears the existing configuration and lets
you create a new configuration.

do manual setup.

any questions, ask our buddy turd. He seems like he's had the best luck so far. I really think my problem is that I had a raid on amd750 then flashed to the new summit firmware and I never did a good ssd clean/prep before installing the os. I'll let you know what happens.