Quote Originally Posted by Leeghoofd View Post
Maybe give 333 strap a go mate, with it I need only 1.55NB voltage and 1.35ish VTT to get 600FSB and 1920Mhz C7-8-7-20 fully stable on air, however I PL is 9 and clock twister set to Moderate. but very nice clocks for daily use. For benching most use the 266strap with 2:3 divider for high +600FSB clocks

For benchign turn off Loadline calibration when pushing high volts !! (at least that's what everyone told me to do to not waste the Samsung chip on the backside )
Hey Leeghoofd,

I guess you are right the culprit is the 200 strap. I was getting Memtest #7 errors no matter the volts.

I was able to fine tune some settings that I never touched before to get lest errors on Memtest #7:

nb skew from auto to 100ps
nbddrref from auto to +50mv

I guess the key to stability lies on those settings for each setup.

I tried to fine-tune the other settings like cpu skew and ddrchA and chB with no luck it keep giving me more Memtest #7 errors.

I still have a lot to learn here.

Strap 333 made all those errors go away