Quote Originally Posted by AceBaran View Post
My first WC, using the XT
Are these temps very good, good, or allright ?

Air



Water



Edit: I also had problems with Bitspower fittings, impossible to fit 2 next to eachother, and the outlet fitting would not go in all the way.. ordered BP 45 degrees fittings used it on the inlet and the fitting in the outlet i screwed it untill it wouldnt go further, but i could clearly see and feel that it wasnt in place, i just used a bit more force, after half a turn it moved smoothly all the way, i unscrewd it and attached it again, this time it went fine...dont be afraid to use some controled force

What other elements are in your system? Do you only have a CPU block? What pump? What Rad?

I mean, those temps are pretty close to what *some* would call the limit, actually most would. Any chance you can back that voltage off some? I guess that looks about right for that clock, however.

If you aren't going to run that speed 24/7, then I wouldn't worry too much. Is that clock for benchmarking, or do you have 3 or 4 GPU's that you are trying to push?

It really depends on what you want to do with your system. Of course, you won't really see those temps unless you have all cores maxed, so really they are not that bad, but they are close to "the limit".

Not sure if I helped or confused, but still, that's a nice clock. Just figure out what you want to do with it, and you can decide if those temps are comfortable for you.

Check this too:

http://www.xbitlabs.com/articles/mai...-deluxe_8.html

Interesting views on Lynnfield temps.

Have fun!