A-Data Xtreme DDR3-2000X 6GB testing/Hyper lovin' ?

[Ronbo56]

Is this the kit?

http://www.newegg.com/Product/Produc...82E16820211423

I'm not quite so sure they are using the same ICS, as the model number for these end in EF, and the kit he's using ends in 3x. The only way to know for sure is to pull the heatspreader...

He dosen't have the 2.0 version. It's the version 2.0 that I have ordered this is the top of the line according to Adata's website, but i paid 2 dollars more per kit oh well............... That is the correct kit.

[Ronbo56]

He dosen't have the 2.0 version. It's the version 2.0 that I have ordered this is the top of the line according to Adata's website, but i paid 2 dollars more per kit oh well............... That is the correct kit.

Don't waste your time these modules suck....................You will be lucky if you get them to run at the rated speed....and I mean I've tried almost everthing and setting..............these suck. If they are elpida's they are low grade, forget about cas7 or 8.

[eva2000]

Don't waste your time these modules suck....................You will be lucky if you get them to run at the rated speed....and I mean I've tried almost everthing and setting..............these suck. If they are elpida's they are low grade, forget about cas7 or 8.

Tried lower vdimm ? i've tested 20GB worth of A-Data 2000X from dual channel kits and average module likes <1.64v vdimm - i.e. can do ddr3-2100+ at 1.62v http://i4memory.com/f83/12gb-data-20...testing-20350/

[Ronbo56]

Tried lower vdimm ? i've tested 20GB worth of A-Data 2000X from dual channel kits and average module likes <1.64v vdimm - i.e. can do ddr3-2100+ at 1.62v http://i4memory.com/f83/12gb-data-20...testing-20350/

Your sticks are different you have hypers. The ones I had (sent back to the egg for a refund), were only 124.99 a set. That is way too cheap for hypers. They would only boot with the specified timings of 9-9-9-24, any thing else my system would not even boot. I should have jumped on the ADATA 2133's from memoryC but I already purchased the dominator GT's.

[zsamz_]

definately bbse not hypers
and doesnt like volts over 1.75v
cant get 2k cas 8 or cas 9 on rex
i think they will do 2k cas8 on p55 will be testin

[DEVIL K-ce]

definately bbse not hypers
and doesnt like volts over 1.75v
cant get 2k cas 8 or cas 9 on rex
i think they will do 2k cas8 on p55 will be testin

Almost the same like mine, max volts 1.75, max freq for benching 1920MHz Cl7. 2k maybe on P55/X58, for 24/7 on x38 16XXMHz 6-7-6-16.

[eva2000]

Your sticks are different you have hypers. The ones I had (sent back to the egg for a refund), were only 124.99 a set. That is way too cheap for hypers. They would only boot with the specified timings of 9-9-9-24, any thing else my system would not even boot. I should have jumped on the ADATA 2133's from memoryC but I already purchased the dominator GT's.

Mind are most likely BBSE as they were cheap 4GB A-DATA 2000X at AUD$136 no way they'd be Hypers when hypers retail in Australia at AUD$295+ for 2x2GB Corsair GT kits. Optimal volts for all 10x 2GB A-DATA 2000X modules for me is between 1.58v and 1.62v.

[zsamz_]

well the 2x2 is utter garbage for bsse if they are bsse
best speed i got on p55 is 2056mhz cas9 ;cas8 will pass memtest but fail in windows
even 2000 cas8 fails in gaming and everything runs damn slow
ty adata learned my lesson garbage goin back
my 2k ripjaws are much better my hyperx too

[DEVIL K-ce]

Ok, for now on X38 mobo max is almost 900MHz at CL6-8-6-16-1T, I think my only limit is motherboard, ram is ok. I can bench at 872MHz 6-8-6-16-1T with PL 8, and with vdimm not more than 1.7V. Not bad for this price and 2 x 2GB kit.



Any other bench is also possible. Already my friend testing this kit on P55, but He have problems to reach 9XXMHz at CL7

[hoodlikegaza]

Don't waste your time these modules suck....................You will be lucky if you get them to run at the rated speed....and I mean I've tried almost everthing and setting..............these suck. If they are elpida's they are low grade, forget about cas7 or 8.

yeah... a dead give away to me is the fact the model numbers are different, and the voltage on these 3x models is 1.6-1.8.