LANPARTY MI P55-T36 Online!

**Sgt.McRuff** · 12-14-2009, 05:02 PM

for cpu cooler?
http://www.newegg.com/Product/Produc...82E16835185129

And for top sided mosfets
http://www.newegg.com/Product/Produc...82E16835708011
In a small itx case, i don't see them staying cool.

Edit:
Any one know when the 400watt psu for sg05 will come out?

**trans am** · 12-14-2009, 05:07 PM

Originally Posted by Sgt.McRuff

for cpu cooler?
http://www.newegg.com/Product/Produc...82E16835185129

And for top sided mosfets
http://www.newegg.com/Product/Produc...82E16835708011
In a small itx case, i don't see them staying cool.

yeah! this is looking amazing man. thanks Sarge!

**nullface** · 12-14-2009, 05:09 PM

All-ready bought a set of MOS-C1 C1100 yesterday for my P55-T36 and had some for my old 8800GT they are awesome. But im a bit worried about the backside mosfets... :/

**Sgt.McRuff** · 12-14-2009, 05:43 PM

Originally Posted by nullface

All-ready bought a set of MOS-C1 C1100 yesterday for my P55-T36 and had some for my old 8800GT they are awesome. But im a bit worried about the backside mosfets... :/

Same, my only idea is to find some metal w/thermal pads, thats same length as the standoffs and use the case as a heat sink.

**nullface** · 12-14-2009, 05:51 PM

Originally Posted by Sgt.McRuff

Same, my only idea is to find some metal w/thermal pads, thats same length as the standoffs and use the case as a heat sink.

That might work, can one get any relay good thermal-tape?

**N19h7m4r3** · 12-14-2009, 05:54 PM

Originally Posted by Sgt.McRuff

Edit:
Any one know when the 400watt psu for sg05 will come out?

If I remember correctly it should either be late December or early January.

Considering it's already into December I'd bet that they'll probably show up in Jan.

**alpha0ne** · 12-14-2009, 08:34 PM

Originally Posted by Clunk

If there's not enough memory slots or USB, then you might be better off with the JR version that's coming later

already own a Jr GF9400 board but there's just something about these itx boards that makes me want to start another project

**nullface** · 12-14-2009, 08:51 PM

Originally Posted by alpha0ne

already own a Jr GF9400 board but there's just something about these itx boards that makes me want to start another project

Haha same same, got the JR P45

**Liquid Cool** · 12-14-2009, 09:15 PM

Any new word on the Lian Li PCQ-08? I was looking at the 07 myself, but this 08 looks like it will fit a 5770 or 5850 with no hassles...

Thought it was supposed to be out sometime in December.

Rockin' little motherboard...

LC

**chinaguy** · 12-14-2009, 09:58 PM

Does any one know where I can get the P55-T36 in the UK! I will be there from the 21Dec to 30Dec! It will have to be a shop as I will not be in one place long enough for the PostOffice to deliver.

Have credit card at the ready and I can get the VAT back!!!!

**N19h7m4r3** · 12-15-2009, 02:25 AM

Scan.co.uk are said to be getting these in at some stage.

No specific date yet though and I don't know if they have a walk in shop.

**K404** · 12-15-2009, 05:30 AM

Are you kidding me? Scan have a MASSIVE shop! They have gaming days every now and then with exhibitors and demos. Paul from Benchtec turns up and does LN2 stuff too

**phinix_mike** · 12-15-2009, 05:33 AM

SCAN will have it this week.

**N19h7m4r3** · 12-15-2009, 05:48 AM

Originally Posted by K404

Are you kidding me? Scan have a MASSIVE shop! They have gaming days every now and then with exhibitors and demos. Paul from Benchtec turns up and does LN2 stuff too

Sorry I wouldn't have known at all. They don't ship to Ireland so I have not looked at their site in about 2 years since they mentioned an irish shop and deliveries ( scan.ie, which never happened )

Wish I could just get a cheap flight to England and pick up the stuff there I need, sadly getting a visa will cost more than this motherboard

**Chris_redfield** · 12-15-2009, 04:04 PM

Does anyone know how much scan plan on charging for the board in £'s?

Would one of these motherboards support an Intel Xeon X3440?

If they are reasonably priced and support the X3440 then I'll hopefully pick up one of these after christmas.

**Sgt.McRuff** · 12-15-2009, 05:10 PM

Might be limited on overclocking on this board.
http://www.clunk.org.uk/forums/revie...html#post78975
Can't say I'm surprised, its a itx. Cooling the back might a given for overclocking.

Doesn't change my plans for the board.

**Clunk** · 12-16-2009, 03:35 AM

Originally Posted by Sgt.McRuff

Might be limited on overclocking on this board.
http://www.clunk.org.uk/forums/revie...html#post78975
Can't say I'm surprised, its a itx. Cooling the back might a given for overclocking.

Doesn't change my plans for the board.

The replacement should be here today or tomorrow.

At this stage, we don't 100% know if it was just a bad board, or if that's how they'll all behave under that kind of abuse. I suspect the latter, but as soon as it arrives, I'll start testing again

**phinix_mike** · 12-16-2009, 03:45 AM

Please do, I hope it was just a bad mobo...

**Pt1t** · 12-16-2009, 04:34 AM

That board is very sexy and oc very well.

32M for HWbot country cup

**Clunk** · 12-16-2009, 10:13 AM

Haha, excellent

How cold outside?

**Unoid** · 12-16-2009, 05:43 PM

This mobo + cheapest Core I3/i5 + 2 1tb HD's = HTPC/NAS

**Tony_L** · 12-17-2009, 05:59 AM

anyone got one running in a sg05/06 yet?

would the temps be good enough with a i5 and a 5770

**trans am** · 12-26-2009, 09:53 PM

Okay I just finished building mine. As far as the 5770 goes, it was too long and my old 4850 was too long to fit in this case. I went back to newegg and ordered a 5750 instead with a single i/o and it fits perfectly.

i5-750 Lynnfield 2.66GHz LGA 1156 95W Quad-Core
DFI LANParty MI P55-T36 LGA 1156 Intel P55 Mini ITX Intel Motherboard
ASUS EAH5750 FORMULA/2DI/1GD5/A
G.SKILL ECO Series 4GB (2 x 2GB) DDR3 1600 (PC3 12800) F3-12800CL7D-4GBECO
OCZ Agility 120GB Solid State Drive
PLEXTOR 24X PX-880SA LightScribe Support
LIAN LI PC-Q07 Mini-ITX Tower Computer Case
Scythe Big Shuriken SCBSK-1000 120mm CPU Cooler
Mushkin XP-650 psu

i put a papertowel roll in to show scale

**N19h7m4r3** · 12-27-2009, 03:52 AM

Looks good. Although it seems like a super tight fit though, that graphics card looks like it's barely touching off the chassis.

**kjeldoran** · 12-27-2009, 08:41 AM

It does look like a tight fit. I'm glad I went with the silverstone sg-06 for my mini ITX build. It can support a 4850 in terms of length (possibly a 4870 but powering it would be a bit too much for the system with a 300W power supply...)

I wish this board was available when I built my system...

Thread: LANPARTY MI P55-T36 Online!

Thread Tools

Search Thread

Rate This Thread

Display

UK Retail

Bookmarks

Bookmarks

Posting Permissions