Originally Posted by Solarfall
i've been busy with lots of different stuff lately and haven't had much time to play with my "toys" but finally got my self a new cpu and it seems to be fairly good so far.
and of course more will follow as i get more time to really get close and intimate with this new D0 chip
so far i've noticed that it has a nasty cold boot bug around -90c wich sucks big time i have to do alot of mounting trickery to be able to boot up with my cascade witch little bit scares me
the settings used were the following:
pci-express frequency 115.7mhz
vcore 1.6v
dimm voltage. 1.72v
Qpi vcore 1.52v
cpu pll 2.0v
ioh vcore 1.225v
cpu vtt 1.52v
ioh/ich/o 1.55v
ich vcore 1.2v
not bad for the good old evga x58 board i would say
huge thread necro, but Solar, did you set that PCIE freq in the bios or go from 110 to 115.7 using eleet?
Reply With Quote
Bookmarks