800D Blood+ Project

[noeru]

next　time　Case two rooms to create a block of aluminum　panels

[noeru]

Thank Aquatuning

[noeru]

Slave runs out and Topufan
Bitspower G 1 / 4 "Black Sparkle 45 Degree IG 1 / 4" Adapter
Bitspower G 1 / 4 "Black Sparkle 90 Degree IG 1 / 4" Adapter
Cooler Master High Performance 120MM R4 Series RED LED Case Fan
Tygon R3400 1/2" ID (3/4" OD) UV Resistant Tubing - Black

[Weevil]

Your dachshunds will thank you to quit smoking cigarettes.

The wires look beautiful BTW. ; )

[noeru]

Your dachshunds will thank you to quit smoking cigarettes.

The wires look beautiful BTW. ; )

Hello Weevil very very thanks
Exactly right! I just now, smoking cigarettes is to stop in the middle of the

[noeru]

This is a test of flow

[noeru]

And decided the line

[Psydrop]

really nice work noeru....

[shadow46x2]

out of curiosity, why the one black line as opposed to all clear or all black?

--j

[buccaneer]

Thanks for sharing your work Noeru! Have an800D here and need ideas.
have some questions:
do you intend to put the mid support foot back under the case? is it sagging or it that the picture?
what made you put the rads outside of the case? not enough room inside or do you yust like it?
Nice work!!

[noeru]

really nice work noeru....

Thank you very, very grateful

out of curiosity, why the one black line as opposed to all clear or all black?

--j

Yes! This black line has no special meaning
I tried it out, I will revert to the original Tygon3603

Thanks for sharing your work Noeru! Have an800D here and need ideas.
have some questions:
do you intend to put the mid support foot back under the case? is it sagging or it that the picture?
what made you put the rads outside of the case? not enough room inside or do you yust like it?
Nice work!!

Thanks for the question　　Sorry I'm weak in English
Room dividers will be rad support.　
Looking to put the rad? Put the rad outside the case?

[Weevil]

It's alive!!!

[Weevil]

what made you put the rads outside of the case? not enough room inside or do you yust like it?
Nice work!!

You seem confused, re-read thread from beginning.

[buccaneer]

HI Noeru! Yes confusing you here sory for that! Was refering to the rad fans in the top. earlyer you showed all internal. too tight?

[Psydrop]

buccaneer what rad are you talking about? Or has he sent you secret pics i can't see.

[buccaneer]

Ha ha Only now I noticed that those fans are layinh lose on top of the case! indeed confuced me. nice work!!!!!!!

[triggs75]

Very nice set up. Are you running one loop with all? Did you end up using both pumps or just the one. Ca you take a pic of the pumps in the bottom.

Great work

Chad

[Mabyboi]

OOOO how are those fans?! i was looking at those. are they actually silent? can we get more pics of em?

[Osterman]

Pretty nice work!.
I would like to ask you, which is the trip that the coolant makes on your system? and also, have you used 1/2 ID 3/4OD compression fittings for your tygon 1/2ID 3/4OD??
About the latter question, I will use the same specifications and well I am a little bit afraid that the compression wont be tight enough.

[exe163]

Amazing job on spacing! I don't think you can put anything more to it.

[allig4t0r]

Great wlog matey :] One question worries me - is your cute dog longer than xspc 480 or not?

[noeru]

It's alive!!!

You seem confused, re-read thread from beginning.

hello Weevil I respect thank you dear represent

HI Noeru! Yes confusing you here sory for that! Was refering to the rad fans in the top. earlyer you showed all internal. too tight?

buccaneer what rad are you talking about? Or has he sent you secret pics i can't see.

Sorry I'm late

It is a thing of the Top rad data XSPC RX480 125mmx58.5mm 25mmFan press - you can

Ha ha Only now I noticed that those fans are layinh lose on top of the case! indeed confuced me. nice work!!!!!!!

thank you　^^;　

Very nice set up. Are you running one loop with all? Did you end up using both pumps or just the one. Ca you take a pic of the pumps in the bottom.
Great work
Chad

Yes, it is one loop. Consider from watching the water temperature to change the loop.
Now DDC3.25x2 XSPC Dual Acrylic Top for Laing DDC is.

OOOO how are those fans?! i was looking at those. are they actually silent? can we get more pics of em?

SSD has taken the time to repair broken away
Yes, I want your photo shows ^ ^

Pretty nice work!.
I would like to ask you, which is the trip that the coolant makes on your system? and also, have you used 1/2 ID 3/4OD compression fittings for your tygon 1/2ID 3/4OD??
About the latter question, I will use the same specifications and well I am a little bit afraid that the compression wont be tight enough.

Thanks for your question if the answer is, I ask you a question again
yes,this Tygon 3603or3400 is 1/2ID 3/4OD This could ensure the flow of many
11/8mm was previously

Amazing job on spacing! I don't think you can put anything more to it.

Thanks If your reference

[noeru]

Great wlog matey :] One question worries me - is your cute dog longer than xspc 480 or not?

haha airu is 32ｃｍ
she is Kaninchen Dachshund

[noeru]

I was once where I validate the air flow case
http://www.xtremesystems.org/forums/...0&d=1260026065

Conditions: Each bench tests conducted in closed cases
Core I7 920
Xeon W3540
Xeon W3520
OCCT or PrimTHtest(3hr)

[noeru]

Results:
Measurement place 6 points
・Aquatuning Thermosensor In- Out Thread G1/4　x2
　Top rad out　Watertemp　
　botom rad out temp
・Mcubed Thermosensor Push/Plugin Bronze 10mm　ｘ1
Reservoir
・Temperature Sensor　x3
　case out temp
Middle of the case
botom rad out air temp
Flowsensor is
・aquacomputer Flow sensor "high flow" G1/4
・aquacomputer aquaero

aquacomputer Flow sensor


botom rad out temp



OCCT I7 920 4336.3 coreV1.375V
Top rad out　Watertemp: 28.1℃　
botom rad out temp: 27.7℃
Reservoir　temp:27.5℃
case out temp：21.1℃
Middle of the case:25.8℃
botom rad out air temp 26.0℃
Flow 277.12L/hr
Fan is top 980rpm
botom 1000rpm or 1200rpm

Prim (3hr) xeon3540 4519.6 corev 1.376(BIOS1.45)
Top rad out　Watertemp: 26.2℃　
botom rad out temp: 25.8℃
Reservoir　temp:25.8℃
case out temp：21.5℃
Middle of the case:24.7℃
botom rad out air temp 24.7℃
Flow 281.27L/hr
Fan is top 980rpm
botom 1000rpm or 1200rpm
I am pleased with the outcome is