Got a P55A-UD6 this week, finally had some time to play with it this weekend. Solid board so far I dusted off an HD4850 CF setup to test out in the board and while I wasn't too excited about using the old cards, either they aren't as horrible as I thought they were or 1156 just makes them a lot better Either way, I ran some benches on it this weekend and figured I'd share...

WCing on the proc, stock 4850s with single-slot coolers using CCC for OC.







Yeah, I forgot to change the mem timings for this 32M





I didn't have too much time, but I decided to drop the SS on real quick (which seems to be getting weaker by the day). This proc has real big diminishing returns >4.9GHz cold or not, high Vc or not, so I just took it easy on the SS and CPU and did some quick, light benches at low Vc







For the record, I was using F5 BIOS that it came with. 220BCLK is about max on ambient cooling (same as every other board I've tried this proc in). On the SS, I to got it up to 235BCLK easily, but didn't try very hard for more. The proc hasn't gone past 240BCLK in any board, so it's almost guaranteed the same here.

As I have more time, I'll put a little more effort into the benches, but it's off to a good start