Quote Originally Posted by nugzo View Post
Another thing about this board...For me, USB keyboard (G19) works 40% of the time to get in to bios. i have 2 have ps2 keyboard to get in bios or even install windows...most of the time. Sometimes the G19 will work. Worked 100% of time on the EVGA.
Ive used a lot of Gig boards, and on everyone of the if you use a USB keyboard, it has to be in a certain port or it wont work in BIOS. Usually the one right above the PS2 port if they have them there.


As for the B2B, what is the default? Minimum is 3, 5 works best for me on my EVGA board.

I would just try the 6gb of ram, at stock and test with Linx using all ram to make sure they are still working. Then try to get your max stable OC, and start adding ram back.

Also, every Gig board Ive used has required a hard CMOS reset to reset the CMOS after a bad setup. Put a jumper on the pins and leave it for a couple hours with the battery pulled.