The E0 Q9550 SLB9V thread (finally!)

[bigwill68]

Are you sure your even on PL8 now? The lowest you should be able to go on 2.00B is PL10 with CAS 5 and PL9 with CAS 4, 2.00D will let you drop to PL9 with CAS 5 and PL 8 with CAS 4.

the lowest my System Memory Multiplier will go is 2.00B and your saying Only cas4 memory will you let drop to PL9? if you would post a code I'll try to run of it and test and post the results and see how...I come out

spinejam Wrote:

Do you need such a high CPU Term Volt. and MCH Voltage for this overclock?

Never tryed lowing it what would you recommend and good trying setting to test?

[Gaul]

@ bigwill = we have similiar templates 4 q9550 @ 4.25 GH here........

anyway ? there is different : PCI Express Frequency (Mhz) ..............: 101
than 100 MHZ ?? cause im still 100

Gaul has incredible results in his out come of Oc'ing at low volts.I wonder is there something.I'm doin wrong to get that? I can't remember what board he got it's not posted in his sign

UD3R......

[bigwill68]

@ bigwill = we have similiar templates 4 q9550 @ 4.25 GH here........

anyway ? there is different : PCI Express Frequency (Mhz) ..............: 101
than 100 MHZ ?? cause im still 100



UD3R......

I got cha I changed that around now to 100 MHZ. I backed it down to 3935GHz for now but here some LinX from 4131Ghz temeplate for 4131Ghz whe.I had it up there for a week running smooth

 MB Intelligent Tweaker(M.I.T.) 

Robust Graphics Booster ..................: Auto
CPU Clock Ratio ..........................: 8
Fine CPU Clock Ratio......................: +0.5 
CPU Frequency ............................: 4.13Ghz (486x8.5)

Clock Chip Control 
Standard Clock Control 
CPU Host Clock Control....................: [Enabled]
CPU Host Frequency (Mhz) .................: 486
PCI Express Frequency (Mhz) ..............: 100
C.I.A. 2..................................: [Disabled]

Advanced Clock Control 
CPU Clock Drive...........................: 1000mV
PCI Express Clock Drive...................: 1000mV
CPU Clock Skew (ps).......................: 0ps
MCH Clock Skew (ps).......................:50ps

DRAM Performance Control 
Performance Enhance......................: Standard
MCH Frequency Latch......................: Auto
System Memory Multiplier ................: 2.00D
Memory Frequency (Mhz) ..................: 972
DRAM Timing Selectable ..................: Manual

Standard Timing Control 
CAS Latency Time.........................: 5
tRCD ....................................: 5
tRP......................................: 5
tRAS.....................................: 18
Advanced Timing Control [Press Enter] 
tRRD.....................................:  4
tWTR.....................................: 4
tWR......................................:  6
tRFC.....................................: 62
tRTP.....................................: 4
Command Rate (CMD) ......................: 2T 
Channel A 
Channel A Timings Settings 
Static tRead Value......................: 9

Channel B 
Channel B Timings Settings 
Static tRead Value......................: 9

Motherboard Voltage Control 

Load-Line Calibration.....................: Enabled
CPU Vcore...............1.22500V..........: 1.343v
CPU Termination.........1.200V............: 1.300V
CPU PLL.................1.500V............: 1.450v
CPU Reference...........0.760V............: 0.830
MCH/ICH 
MCH Core................1.100V............: 1.300v
MCH Reference...........0.760V............: 0.800v
MCH/DRAM Reference......0.900V............: 0.900v
ICH I/O.................1.500V............: 1.450v
ICH Core................1.100V............: 1.300v
DRAM 
DRAM Voltage............1.800V............: 2.1v
DRAM Termination........0.900V............: 0.770V
Channel A Address Vref..0.900V............:Auto
Channel B Address Vref..0.900V............:Auto

Advanced Settings 
Limit CPUID Max. to 3.....................: Disabled
No-Execute Memory Protect.................: Enabled
CPU Enhanced Halt (C1E)...................: Disabled
C2/C2E State Support......................: Disabled
x C4/C4E State Support....................: Disabled
CPU Thermal Monitor 2(TM2) ...............: Enabled
CPU EIST Function.........................: Disabled
Virtualization Technology.................: Disabled
__________________

[Gaul]

@ bigwill68 = my little share, i'll make ddr2 1200 for 4 GB