XS HWBot Team

[G.Foyle]

See? And you were laughing when I said Jmax-Hardware was our next stop

[Hondacity]

i laugh man ...coz i crazy

hehehe

woot 1C temps

hopefully i can get vantage tweaked tonight

[thijs]

8000 points would be nice by end of december
Next wednesday -> dewar is full again. i will check for a torch aswell,
And the goal is to get a bigger dewar, so i can do some 3d aswell,
that 5770 needs to go under LN2 b4 i sell it!

[emertX]

I need just a better board, and my W3520 will fly!


I just can't move up my board for higher bclk!

[AceBaran]

Thijs u dutch right ?

Do u live close to rotterdam ? teach me to overclock my rig ..

Ill have milk and cookies

[jmke]

ran out of time submitted some 05 and 06 but my 03 was bugged and vantage wasnt playing nice

here is how nice my i7 960 is

please note that Wprime 2.00 is not supported by HWbot!
use 1.55 instead

[Linuxfan]

We might actually reach 7800 points until the end of the year!

Hopefully we'll get 8k+.
Nice runs billdavis!

Edit:

If your benching 3d.......I could lend you a board and cpu legally.......I think you'll be hard pressed to find a 920 DO like this + it likes cold. I also have a board that has less of a bclk wall than the UD4P.....unless you feel like modding.

Thats a really cool idea...
How high can the bclk go on your board?
1.3x Vcore at 4.5ghz HT is very good.

[chew*]

Thats a really cool idea...
How high can the bclk go on your board?
1.3x Vcore at 4.5ghz HT is very good.

Yah considering that was on stock cooler i'd say really good

Its a EX58-UD3R v 1.6, bclk wall is fixxed, won't match the EVGA but it can come damn close around 240 ish. Only drawback is 2 PCI X slots.

I can always mod out the UD4P though, that should be good for 235 once modded and has 3 PCI X slots. Let me know.

[emertX]

Would you mod mine, too?
I need more bclk!

[Don_Dan]

See? And you were laughing when I said Jmax-Hardware was our next stop

Yeah, just about 550 points to go, that's not really that much.... hehe...

( 900 points to top ten.... )

I need just a better board, and my W3520 will fly!

I just can't move up my board for higher bclk!

Are you benching for us too?

If so, I'm glad to have another German on board!

Hopefully we'll get 8k+.

Sure we'll get to 8k again if we continue to push like that!

Would you mod mine, too?
I need more bclk!

Might be a bit impractical to ship it to the US just to get it modded....

[billdavis]

Hmm had to change out my HyperX's for another set i had

can anyone tell me a average Vtt for a 5ghz cpu

and what vdimm they run

[thijs]

i had 1.5 - 1.525VTT for 5.4ghz , but i could do 5.1ghz 3dmark vantage / 06 with like 1.375 , it's really different and all.

[billdavis]

yeah, ive been at 1.35 for 5ghz but all of a sudden it now wants around 1.5 im not sure what ive changed

thijs could you please send me a screen shot of your 5+ghz settings showing the evga voltage settings and your pcie freq

[Linuxfan]

Yah considering that was on stock cooler i'd say really good
Its a EX58-UD3R v 1.6, bclk wall is fixxed, won't match the EVGA but it can come damn close around 240 ish. Only drawback is 2 PCI X slots.
I can always mod out the UD4P though, that should be good for 235 once modded and has 3 PCI X slots. Let me know.

That'd be really cool.... Thanks for the offer!!!
I'm going to try to get a i7 975 again to test or something but if it doesn't work out and I get some more nice GPUs in I might just take you up!
Right now I only am going to have a 5870 and a 5770... need more GPUs to make it worthwhile!
Maybe I can grab two 5970s...

[thijs]

yeah, ive been at 1.35 for 5ghz but all of a sudden it now wants around 1.5 im not sure what ive changed

thijs could you please send me a screen shot of your 5+ghz settings showing the evga voltage settings and your pcie freq

Dont think i have a screenshot with all the settings, but here is kind of what i used:

Vcore: 1.63 ( 3845B , they need a good amount of volts!
Dimm voltage: 1.65
CPU PLL: 1.8
IOH PLL: 1.5
QPI PLL: 1.1 or 1.15
IOH Vcore: stock, but 1.25 may help
IOH/IC Vcore: just stock
ICH Vcore: stock

CPU independance : LESS or Auto
QPI signal: LESS

i always just use pci-e 115 mhz, for suicide mhz runs higher, so i know that wont limit it.

This is with E760, get bios S61B, nice bios.

[TheGoat Eater]

The clocks are really nice, but remember to use version 1.55 of WPrime when you submit to hwbot!


We have contributions by thijs and billdavis with their i7s under cold, PcCI2iminal for the country cup and TheGoat Eater's Sempron 140 session.

Another score I saw yesterday was made by jakethesnake011, he has a nice collection of GPUs, 4870X2, GTX 295, HD 5870 and 5970.

We might actually reach 7800 points until the end of the year!

I am thinking I am going to keep a hold of this Sempron 140 and take it to Taipei with me and push it hopefully to a WR CPU-Z and other WRs on a 790FX-GD70 or better - - - I also plan on a bit of Destruction with my W3570s and 275s (will have 3 hopefully soon) as my "dead" 275 is now alive!!! (I'm a necromancer of HW) I also want to get a 965 C3 and venom - too much fun too little time and money lol - need a job asap

[Linuxfan]

I have access to a 5970 today but don't have a Core i7 to test it with....
Its going to be shipped this week so no time to get a core i7 rig...
I'm going to try it with a watercooled e8600 and see if I can get anything out of 3dm03...

[chew*]

I have access to a 5970 today but don't have a Core i7 to test it with....
Its going to be shipped this week so no time to get a core i7 rig...
I'm going to try it with a watercooled e8600 and see if I can get anything out of 3dm03...

I can have an i7 920 rig with decent cold resistance to you in 24 hours or a P55 + 860 which likely coldbugs....

Seems to me if you pair that with a 5870 you can do some damage.

[Don_Dan]

I have access to a 5970 today but don't have a Core i7 to test it with....
Its going to be shipped this week so no time to get a core i7 rig...
I'm going to try it with a watercooled e8600 and see if I can get anything out of 3dm03...

Try to run 01 and AM3 as well!
How high can you get your E8600 under water?

[Linuxfan]

I can have an i7 920 rig with decent cold resistance to you in 24 hours or a P55 + 860 which likely coldbugs....
Seems to me if you pair that with a 5870 you can do some damage.

I'll just have to buy another for myself then and I'll take you up on that!
This one is sold sold sold so I don't have even 24hrs with it... :cry:
I'm running the E8600 on water at 4.75 right now, I think I'll hook it up to the cascade in a minute and run it at 5.5ghz, the scores will rock with that...
With stock 5970 clocks and the e8600 at 4.5 in W7 I got 115k in 3dm03 which will get 27 boints on HWBot...
I'll see if I can get 01 and AM3 running and see if its scaling well in 01 and if the e8600 is good enough in AM3....
Should have an 5870 for myself Monday or Tuesday, its on the way...

Can you run a 5970 and a 5870 in tri-crossfire? I know they are different generations (the 5900 and 5800 series) but the 5970 is two 5870 cards like the 4870 and 4870 X2...

[Linuxfan]

Update: finished the 03 run at 4.75ghz with stock 5970 clocks in W7 and got 118,987.

Update #2: ran the GPU with slightly higher core clock and got 118,599. Why lower when overclocked? I'll run it again and overclock the GPU even more....
CPU bottleneck?

This card runs HOT!
Was idling at 50C, turned the fan up to 100% (louder than other graphics cards fans that I've heard too!) and have some extra fans on top of it and it went down to 30C.
Its in a Cosmos S case now, going to take it out when I put the CPU on Cascade...

[Don_Dan]

I'll just have to buy another for myself then and I'll take you up on that!
This one is sold sold sold so I don't have even 24hrs with it... :cry:
I'm running the E8600 on water at 4.75 right now, I think I'll hook it up to the cascade in a minute and run it at 5.5ghz, the scores will rock with that...
With stock 5970 clocks and the e8600 at 4.5 in W7 I got 115k in 3dm03 which will get 27 boints on HWBot...
I'll see if I can get 01 and AM3 running and see if its scaling well in 01 and if the e8600 is good enough in AM3....
Should have an 5870 for myself Monday or Tuesday, its on the way...

Can you run a 5970 and a 5870 in tri-crossfire? I know they are different generations (the 5900 and 5800 series) but the 5970 is two 5870 cards like the 4870 and 4870 X2...

Yeah, hook it up on cascade, at 5.5GHz and with an overclocked card 03 will fly!

You can run 5970 + 5870 in CFX mode as far as I know, since they are one generation, just different perfomance classes.

Please keep me posted on 01 and AM3 scores if you decide to run it!
You'd need Win XP for 01 single card, and most likely for AM3 too, so maybe you should try to get the most out of 03 first...

Update: finished the 03 run at 4.75ghz with stock 5970 clocks in W7 and got 118,987.

Update #2: ran the GPU with slightly higher core clock and got 118,599. Why lower when overclocked? I'll run it again and overclock the GPU even more....
CPU bottleneck?

You'll have PM in a minute!

[Linuxfan]

Thanks Don_Dan!
Leaned the OS up a little bit and am running it with GPUs at stock again, it should get 119k...
I'll pump the CPU up some more from there then hit the cascade.

[Don_Dan]

Thanks Don_Dan!
Leaned the OS up a little bit and am running it with GPUs at stock again, it should get 119k...
I'll pump the CPU up some more from there then hit the cascade.

Try to break 120k on water, and then make some decent runs on cascade, 800MHz+ on the CPU should help your score.... You already figured you might be able to hit Top 20 global for 03?

[Linuxfan]

Try to break 120k on water, and then make some decent runs on cascade, 800MHz+ on the CPU should help your score.... You already figured you might be able to hit Top 20 global for 03?

Forgot about the top 20.... I"ll have to get the submission saved then put in on the ORB right?