Yea I'm sure they just glue the tag onto the PCB for ****s and giggles. Anyway here is a pic.
Yea I'm sure they just glue the tag onto the PCB for ****s and giggles. Anyway here is a pic.
thats the old mcp350..that martin showed the modification on...
the thread starter's got the new pump... look at post #9 and #25 of this thread
**usps hasn't delivered my pumps..ordered it friday..sheesh
slow lol. how's the wiring look on your pmp400's? same as my mcp350?
Sorry I was replying to the OP since he asked if the pump in the link was moddable. I just received that pump from them less than a week ago and posted a pic up. Not sure how he got a different one when they were ordered about the same time.
pmp 400 (ddc 3.1?)
mcp 355 side by side with pmp400 (ddc3.1?)
That is a lot of pumps lol. I'll trade my 3.1 for one of your 3.2's
Last edited by Burninator; 11-19-2009 at 07:22 AM.
i just received 3 pumps...all the pcb's are identical to the pmp400s...and like your ddc3.1 10w...
mine are labeled as 18w..i don't know what else could be seen..i'm studying the pcb UL or UR inscripted on it...dunno what they mean ...
ddc3.25 and pmp400 from the right...
**burninator...i don't know how you can mod that bitsch LOL
. Since my 3.1 appears to be the same as your 3.25's how bout we just trade? LOL
Man this sucks... Now I'm stuck with a 10W pump...
Originally Posted by Hondacity
i'm guessing you might have a ddc3.25
Man this sucks... Now I'm stuck with a 10W pump...
i'll monitor the rpm later...take note of your rpm too..lets compare numbers...
That would be nice.
Alright, I'll do that. Would it be ok to run the pump dry to get a RPM reading or should I set up a small loop?
you'll kill it
Lol. K.
Set it up and got a reading of 3900RPM, that good or bad?
Last edited by Burninator; 11-19-2009 at 11:25 PM.
they are identical right? so the pmp-400 is a 3.25 !
BTW still no reply from Koolance!!
Last edited by quattro_; 11-20-2009 at 07:20 PM.
@Honda: got any numbers?
EVGA E758 A1
Core i7 920 @ 4ghz
6gb DDR3 1600 OCZ Gold
XFX 6870CF
Corsair TX850
Cooler Master HAF 932
Water Cooled
im setting up my scope...gimme 45minutes
my classified board ...reads 4550-4585rpm
Only posting pcb shots that have already been posted... will be running PQ in the near future.
Last edited by skinnee; 11-24-2009 at 11:29 PM. Reason: had to make thumbnails, page width was killing me...
skinnee
do you have the 350?
nope, MCP355's and PMP-400. Never had the notion to buy the 10w version.
thanks
if you look closely at the PCB's... the traces are different.
The only difference I'm seeing between the OP's 3.1 and the pics skinnee and Hc have posted are the numbers on the sticker. . .and I've already stated that Laing has a long history of chaos in that department.
Did you get a mano?
Between your 355 and PMP400, yes. . .this is true. . .but between the PMP400 and the pic the OP posted of his 350, no.
I'm gonna be picking up a swifty 350 from P-PC's sometime soon and hope I get what the OP got, anyone know a place I can score a cheap DDC3.25 (let's say $65 or less)?
Last edited by Waterlogged; 11-25-2009 at 12:03 AM.
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
no mano...i'm saving up for a gtown
**wl
do you remember your rpm for the 355? was it around 4300?
Last edited by Hondacity; 11-25-2009 at 12:03 AM.
In that case. . .Dead head Dead head Dead head Dead head Dead headno mano...i'm saving up for a gtown
**wl
do you remember your rpm for the 355? was it around 4300?
I had to check my video because I'd forgotten and it was 4350 to 4380, so it's in the neighborhood.
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
Posting Permissions
Reply With Quote
Bookmarks