Intel 4.5GHz & 5GHz LinX Stable Club

[Jor3lBR]

Could you correct my vcore on the ranking? Please don't use ET6 as reference use CPUZ vcore. Thanks.

[dejanh]

This is my everyday 24/7 overclock, fans at ~1000RPM (3 fans, sandwiched, silent), MCR320-QP-Stack (2 radiators, sandwiched), HeatKiller Rev.3.0 CU, EK full cover block...lately the ambient temperature in the computer room is about 27C (due to winter heating) hence the higher temperatures. This overclock is completely rock-solid and can resume from S3 without any issues. This is With Vdroop and load voltage is ~1.411V.



Here is a run I did some time ago...same cooling setup, though lower ambient temperatures (about 24C) and slightly higher fan speed (about 1800RPM).



I did another run at 4.7GHz but never took a screen-shot. I might redo it over the next few days if I have time. All of this is on EVGA X58 Classified E759. Finally, the darn CPU-Tweaker has been having problems for me for quite some time now with not being able to detect clocks properly. This all started after I updated to CPU-Tweaker 1.2 and/or changed the DRAM from Corsair 1600MHz kit to Mushkin 1600MHz kit. The multipliers are correct though in CPU-Tweaker, just for some reason does not show the clocks.

[zalbard]

Could you correct my vcore on the ranking? Please don't use ET6 as reference use CPUZ vcore. Thanks.

Yes, sure, no problem!