Gigabyte GA-MA790FXT-UD5P Thread

[Balb0wa]

any chance of hosting f3l for the ud5p please chew?

[chew*]

I can email it. Atm my personal webspace is full. My other webspace doesn't support dl's.

[Balb0wa]

I can email it. Atm my personal webspace is full. My other webspace doesn't support dl's.

Found it now, just flashed

here if anyone wants it

http://premium1.uploadit.org/bobbybo...d5pbiosf3l.zip

[Stanley Pain]

So F3L is the "pro OCers" choice of bioses?

[neo mike]

So i hear, but im using F7 with no issues at all overclocking so.

[Don_Dan]

So i hear, but im using F7 with no issues at all overclocking so.

I was using F5 for a while and to be honest my Dominator GT clocked better with it, at least I couldn't get them to run as fast as before in the limited amount of time I spent with F3L.

[Bullet92]

So F3L is the "pro OCers" choice of bioses?

No, it's the choice for OCers who don't need unlocking features. Less option = less code = less complicated

[stetsonaw]

question, trying to unlock the L3 on my "deneb", do I need to turn off "Halt" in the bios to be able to boot after I turn EC mode to Hybrid and ACC to auto (or all cores/per core)?

[Stanley Pain]

No, it's the choice for OCers who don't need unlocking features. Less option = less code = less complicated

Ah got it. So Looks like I might want to check out that bios for my 955 BE if it supports it that is.

Thanks.

[neo mike]

Hey Chew you shouldnt have given me that link for a stable 3.8 overclock, it worked like a dream, but it took all the fun out of it, now i have to go for 4 +ghz, , no im just playing around, it helped me understand the process of overclocking AMDS, thanks.

[shaolin95]

Chew, on that link about getting 3800.
I noticed you push the NB a lot harder than the CPU Voltage.
In my case that I am leaving the RAM at 200 and just doing the OC with the NB at 2600 and the raising the CPU multi. Do you think that is still the best way to do it?
Right now for 3900 I use .175 for NB and .150 for CPU.
Regards

[chew*]

Chew, on that link about getting 3800.
I noticed you push the NB a lot harder than the CPU Voltage.
In my case that I am leaving the RAM at 200 and just doing the OC with the NB at 2600 and the raising the CPU multi. Do you think that is still the best way to do it?
Right now for 3900 I use .175 for NB and .150 for CPU.
Regards

I try to match the ratio that cpu is at stock.....an optimum would be 4000 cpu 3000Nb but not possible sadly so 3600 cpu 2600 NB and so on.

[shaolin95]

Sorry I meant voltage wise.
I see that you have NB at .300 while CPU just at .100.

[chew*]

Sorry I meant voltage wise.
I see that you have NB at .300 while CPU just at .100.

If that was my 955 it maxxed out at 3800 NB on ln2, while other chips I have have done 4500 NB.........voltage is always and always will be individual to a chip.

[neo mike]

Question fellow UD5Pers why do i keep failing test 2 in prime 95 i cant get stable, what does failing test 2 mean ?

[chew*]

Question fellow UD5Pers why do i keep failing test 2 in prime 95 i cant get stable, what does failing test 2 mean ?

small fft 8k 10K = cores.

large fft 1024k 384k etc etc = NB/IMC/memory

[neo mike]

SO how do i fix it ? what voltages would i need to adjust ?

[chew*]

Ram and or cpu_nb volts.

[neo mike]

Thanks working on it now

[neo mike]

Ok finally got it stable, took some work. I guess its not bad for 24/7, will have to do it all again when i purchase my new memory, but im happy with it

[ah_khoo]

Ok finally got it stable, took some work. I guess its not bad for 24/7, will have to do it all again when i purchase my new memory, but im happy with it

very nice nb freq there mate, what kinda voltage u pumped into d imc?

for a 2400 nb, i need around 1.2~1.225v.

anyone tried high htt oc on this board? just gave it a run lastnite, was surpised that d board did pretty ok.

[neo mike]

Im using 1.28 nb vid. Nice bus speed there 300. I ran a little test of ram at 1600 cas 7 and ram at 1500 cas 6, and its basically idenical on everest between the 2.

[ah_khoo]

Im using 1.28 nb vid. Nice bus speed there 300. I ran a little test of ram at 1600 cas 7 and ram at 1500 cas 6, and its basically idenical on everest between the 2.

good job there w/ d ram...

vdimm used for 1500 cas 6? i found that having tighter timing will tax d mileage more than having high freq w/ looser timing. there are too many options (especially d strength thingy) for ram & i have no idea how to tweak them.

[neo mike]

im pumping 1.95 in my ram, its rated for 1.9, so not much over, it will go 1550 cas 6 thats max. Yeah im seeing it likes lower cas, so i guess with my new sticks im trying for 1700 + cas 6 we will see, i got some nice elpida hypers on the way.

[Balb0wa]

f8c beta bios ?

8C 2009/11/03

1. Beta BIOS
2. Add CPU Core Control option


http://www.giga-byte.com/Support/Mot...3005#anchor_os