Name GT posted some with higher bclk. Do you all think this board is very capable of higher bclk on air? I think I can manage 205 but I 'm having trouble getting stability in the range of 206 to 210 and 210 and above always seems to lock up. Lets see some max bclk screen shots.
Ryzen 9 on the test bench... Sometimes older generation/tech as well.
I've not gotten over 210 personally, but that's likely not the board's fault. I've seen people talking about 860s that hit a wall around there without sub-zero cooling. Then again, I haven't tried with the new BIOS...so we'll see!
[XC] gomeler - Public note: If you PM me to tell me that I am disrespectful at least have space in your PM box so I can tell you I don't care.
[XC] gomeler - I come to the news section to ban people, not read complaints.
I heart gomeler!
same here i got a wall wirh 4 cores @ 215
2 cores can go higher
on ud4p my wall was 201 lol
maximus IV extremegtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52vgtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35
gigabut p35c-ds3r
gigabut x38-d6q
ballistix 85001240mhz@2.02v
Haha...well hey, at least you're better off than you were.
[XC] gomeler - Public note: If you PM me to tell me that I am disrespectful at least have space in your PM box so I can tell you I don't care.
[XC] gomeler - I come to the news section to ban people, not read complaints.
I heart gomeler!
duhhh the board dies after 4 daysOriginally Posted by hokiealumnus
Haha...well hey, at least you're better off than you were.
maximus IV extreme
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v
OCZ3RPR1866LV6GK hypers
dfi ut p35
gigabut p35c-ds3r
gigabut x38-d6q
ballistix 8500
OBSIDIAN 800D, ASRock P67 Professional, Intel 2600K [UNLOCKED] watercooled by Ybris Black Sun (HWLabs Black Ice SR1-360 w/Nanoxia 2K, Swiftech MCP655 + Res XSPC), 4GB KINGSTON LoVo, SSD 128GB Crucial RealSSD C300, HDD Seagate Barracuda 250GB/500GB, Corsair HX 750w, nVidia 260 GTX XFX Black Edition, X-FI Xtreme Gamer
just started priming at 4ghz (200x20).
settings
1.4v vcore
1.35v vtt
PLL 1.8v
PCH 1.125v
DRAM 1.65v
DDR3 1600 8-8-8-24
so far a very mediocre chip
Main System: Core i7 860-Kingston LoVo DDR3 1866-eVGA P55FTW--2x Gigabyte GTX460's in SLI-Intel X25-M 80GB-WD Caviar Black 1TB 32MB Cache HDD-Razer Barracuda AC-1-Corsair TX750-Samsung Dual Layer DVD Burner-Pioneer Dual Layer DVD Burner-Cooler Master CM690-II Advanced-Thermaltake Frio
Secondary System: Core i3 530-eVGA H55-2x2GB Crucial DDR3 D9KPT -BFG GTX260-500GB Seagate 7200.12 HDD-Corsair HX620-NEC Dual Layer DVD Burner-Antec 300-Cooler Master Hyper 212+
4.0ghz
OBSIDIAN 800D, ASRock P67 Professional, Intel 2600K [UNLOCKED] watercooled by Ybris Black Sun (HWLabs Black Ice SR1-360 w/Nanoxia 2K, Swiftech MCP655 + Res XSPC), 4GB KINGSTON LoVo, SSD 128GB Crucial RealSSD C300, HDD Seagate Barracuda 250GB/500GB, Corsair HX 750w, nVidia 260 GTX XFX Black Edition, X-FI Xtreme Gamer
Nice! these socket 1156 processors shine at 3.6... I just wish they could do the same with 200Mhz to 400Mhz more.
Ryzen 9 on the test bench... Sometimes older generation/tech as well.
The two chips I've tested seem to prefer vtt in the 1.225v to 1.275v range. Going above 1.30v has never seemed to help.just started priming at 4ghz (200x20).
settings
1.4v vcore
1.35v vtt
PLL 1.8v
PCH 1.125v
DRAM 1.65v
DDR3 1600 8-8-8-24
so far a very mediocre chipand yet for others it seems that their chips really do respond to higher vtt.
Ryzen 9 on the test bench... Sometimes older generation/tech as well.
4ghz failed P95 at those settings. seems the sweet spot for this processor is 3.8ghz @ 1.35v vcore, 1.25v VTT. i can prime all day with those settings.The two chips I've tested seem to prefer vtt in the 1.225v to 1.275v range. Going above 1.30v has never seemed to help.
Main System: Core i7 860-Kingston LoVo DDR3 1866-eVGA P55FTW--2x Gigabyte GTX460's in SLI-Intel X25-M 80GB-WD Caviar Black 1TB 32MB Cache HDD-Razer Barracuda AC-1-Corsair TX750-Samsung Dual Layer DVD Burner-Pioneer Dual Layer DVD Burner-Cooler Master CM690-II Advanced-Thermaltake Frio
Secondary System: Core i3 530-eVGA H55-2x2GB Crucial DDR3 D9KPT -BFG GTX260-500GB Seagate 7200.12 HDD-Corsair HX620-NEC Dual Layer DVD Burner-Antec 300-Cooler Master Hyper 212+
agreed, i think that these chips need too many vTT over 3800mhz ...
OBSIDIAN 800D, ASRock P67 Professional, Intel 2600K [UNLOCKED] watercooled by Ybris Black Sun (HWLabs Black Ice SR1-360 w/Nanoxia 2K, Swiftech MCP655 + Res XSPC), 4GB KINGSTON LoVo, SSD 128GB Crucial RealSSD C300, HDD Seagate Barracuda 250GB/500GB, Corsair HX 750w, nVidia 260 GTX XFX Black Edition, X-FI Xtreme Gamer
my chip is good for 4.0 1.38v 1.3v vtt
i'm stable @ 4.2 1.41v but it gets too hot priming
maximus IV extreme
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v
OCZ3RPR1866LV6GK hypers
dfi ut p35
gigabut p35c-ds3r
gigabut x38-d6q
ballistix 8500
1.38 vCC & 1.30 vTT? try 1.35/1.35
OBSIDIAN 800D, ASRock P67 Professional, Intel 2600K [UNLOCKED] watercooled by Ybris Black Sun (HWLabs Black Ice SR1-360 w/Nanoxia 2K, Swiftech MCP655 + Res XSPC), 4GB KINGSTON LoVo, SSD 128GB Crucial RealSSD C300, HDD Seagate Barracuda 250GB/500GB, Corsair HX 750w, nVidia 260 GTX XFX Black Edition, X-FI Xtreme Gamer
its safer with more v-core than vtt1.38 vCC & 1.30 vTT? try 1.35/1.35
maximus IV extreme
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v
OCZ3RPR1866LV6GK hypers
dfi ut p35
gigabut p35c-ds3r
gigabut x38-d6q
ballistix 8500
I love this little board.. feels like a bumper car & makes my E760 look like Tweek..
& the FTW is definitely faster than the GA-P55-UD6 which I had before the FTW.
Mem is G.Skill F3-17066CL8D-4GBPS
OBSIDIAN 800D, ASRock P67 Professional, Intel 2600K [UNLOCKED] watercooled by Ybris Black Sun (HWLabs Black Ice SR1-360 w/Nanoxia 2K, Swiftech MCP655 + Res XSPC), 4GB KINGSTON LoVo, SSD 128GB Crucial RealSSD C300, HDD Seagate Barracuda 250GB/500GB, Corsair HX 750w, nVidia 260 GTX XFX Black Edition, X-FI Xtreme Gamer
OBSIDIAN 800D, ASRock P67 Professional, Intel 2600K [UNLOCKED] watercooled by Ybris Black Sun (HWLabs Black Ice SR1-360 w/Nanoxia 2K, Swiftech MCP655 + Res XSPC), 4GB KINGSTON LoVo, SSD 128GB Crucial RealSSD C300, HDD Seagate Barracuda 250GB/500GB, Corsair HX 750w, nVidia 260 GTX XFX Black Edition, X-FI Xtreme Gamer
Nice clocks Kurtz but good lordy that's some vcore
Current: AMD Threadripper 1950X @ 4.2GHz / EK Supremacy/ 360 EK Rad, EK-DBAY D5 PWM, 32GB G.Skill 3000MHz DDR4, AMD Vega 64 Wave, Samsung nVME SSDs
Prior Build: Core i7 7700K @ 4.9GHz / Apogee XT/120.2 Magicool rad, 16GB G.Skill 3000MHz DDR4, AMD Saphire rx580 8GB, Samsung 850 Pro SSD
Intel 4.5GHz LinX Stable Club
Crunch with us, the XS WCG team
thanks mateNice clocks Kurtz but good lordy that's some vcore
OBSIDIAN 800D, ASRock P67 Professional, Intel 2600K [UNLOCKED] watercooled by Ybris Black Sun (HWLabs Black Ice SR1-360 w/Nanoxia 2K, Swiftech MCP655 + Res XSPC), 4GB KINGSTON LoVo, SSD 128GB Crucial RealSSD C300, HDD Seagate Barracuda 250GB/500GB, Corsair HX 750w, nVidia 260 GTX XFX Black Edition, X-FI Xtreme Gamer
Testing a new i5 with ~1.225 VID. Running "with out vdroop" so the board overvolts to ~1.376v load.
Ryzen 9 on the test bench... Sometimes older generation/tech as well.
Similar to my 860. 1.37v vcore and 1.35v VTT for 5 hours OCCT stability + a bunch of 3D runs. It can do more but I like the temps below 70C loaded.
MB Reviewer for HWC
Team OCX Bench Team
I had hoped to break 30k in 06 with cf5870's but the 8x pci-e are holding the cards back I guess. Not a bad score at all but was able to get 27k+ on my 775 giga ud3p/4890 cf rig so not a big jump.
Does anyone know how many layers PCB of this board has?tia.
Just reveived this board ...
and got a foxconn socket
Should I be dissapointed now ?
Posting Permissions
Reply With Quote
Bookmarks