Hey AgentGOD
Nice work man.
Just did a little testing with two gtx295's
But it will only set to 3 of the cores.
I've taken 3 screenshots that may help.
Hey AgentGOD
Nice work man.
Just did a little testing with two gtx295's
But it will only set to 3 of the cores.
I've taken 3 screenshots that may help.
Originally Posted by Tom|Nbk
When increasing voltage via softmod OVP trigger is always higher than the set voltage.
You were not supposed to see this.
So, this won't work on my evga 285's - will it work on my evga 295's, or did they cheap out on those too ??? Oops, never mind, just saw Deanzo's post above :P
Last edited by MaadDaawg; 09-03-2009 at 04:43 PM.
Won't work on my ASUS Top 4850 either. Not Volterra VRM's...
Smile
so what voltage is recommended for GTX295 (gpus) card?can anyone recommend?
ASUS P8Z68-V PRO B3 + Intel i5-2500k @ 5.0 GHz + Noctua NH-D14
8GB DDR3 Corsair Vengeance XMP (kit 2x 4GB) 1866MHz / Gainward Geforce GTX470 SLI watercooled
120GB SSD Kingston HyperX (games) / 1x 30GB SSD OCZ Vertex Turbo (system)
22" LG IPS226V-PN / PSU Fortron AURUM GOLD 700(W) / Cooler Master HAF Tower RC-932
@ NaMcO
Do you use the standard air cooling system or did you switch to liquid ??
/Nikra
The Asus 4850top just use the asus smartdoctor to raise voltage on the gpu
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
is anyone else having problems getting more than 1.36v to work
i am talking DMM measured here
not what you can apply
i can apply 1.6v but the cores will not take more than 1.36v once actually measured
4870X2 card
just remember x2 has 2d-low/med/hi and 3d-low/med/high if you set 1.3v in os (2d) when you go to 3d mode it reverts back to the stock 3d volts 1.26v
ive hard modded my x2 (voltera hax) for 1.33v 3d-hi it gives 1.26 2d-low
cant get the voltagetunner to work but im blaming the os for not having c++
@AgentGOD
good job
I LOVE LAMP!
I did that on air, it's now watercooled, but worked fine before.@ NaMcO
Do you use the standard air cooling system or did you switch to liquid ??
/Nikra
ASUS Sabertooth P67B3· nVidia GTX580 1536MB PhysX · Intel Core i7 2600K 4.5GHz · Corsair TX850W · Creative X-Fi Titanium Fatal1ty
8GB GSKill Sniper PC3-16000 7-8-7 · OCZ Agility3 SSD 240GB + Intel 320 SSD 160GB + Samsung F3 2TB + WD 640AAKS 640GB · Corsair 650D · DELL U2711 27"
i get 1.36 in windows idle and loadjust remember x2 has 2d-low/med/hi and 3d-low/med/high if you set 1.3v in os (2d) when you go to 3d mode it reverts back to the stock 3d volts 1.26v
ive hard modded my x2 (voltera hax) for 1.33v 3d-hi it gives 1.26 2d-low
cant get the voltagetunner to work but im blaming the os for not having c++
@AgentGOD
good job
my card is forced to 3d clocks all the time
Thanks! I've been waiting for this.
Regards,
Raine
Pret travaux
full bois moddage ?
1.36 in all locations
i give mine 1.4v to the cores in 3dmode on air cooling 900 core worked for 05 need more speed
I LOVE LAMP!
this tool work only with voltera chip, right?
how can i find what i have?
i7 4770k @ 4.4GHz | MSI MPower | 8gb Geil Evo Corsa 2133 | Gigabyte GTX670 wf3 | Samsung 830 256gb | 3xWd Re3 raid5 | Antec HCG 620w
Θ Core i7 4770k 4.4ghz 1.3v :'( Θ Core i7 2600k 4.5ghz 1.344v Θ E8400 500x8 4ghz 1.36v Θ Core i7 860 @ 4ghz 1.328v Θ Turion M500 2.2ghz 1.025v Θ Phenom II 955 c3 3.91ghz 1.52v Θ Phenom II 545 3.77ghz 1.47v Θ
_~{ ALL RS }~_
No luck with an Asus EAH 4870 1GB, says it does not have correct regulator. Wonder what my options are with this card.
Use asus smartdoctor
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
I have Smartdoctor installed. The voltage tab is blank with nothing to change. Is there a patch or something I need to install like with the EVGA software? I always assumed that this tab was only for 5xxx series cards.
Anyone with an hd4870x2 can tell me how far they clocked it on what voltage? I can't seem to find any references anywhere, even on google!
MSI P67 GD65 B3
2500k 4.8
GTX480 835/1650/2000
8gb ram
Win7
MSI 3870X2 OC edition and this works!!!!! YAY! Here comes 1GHz! I upload pic when start ocing this.
This works awesome, respect!!
I also get the Voltage regulator error.
My card is a Asus HD4890 Dual fan, I know it has a controllable VRM as It comes with SmartDoctor and I can modify voltage using that?
I'd like to achieve 1GHz using just over 1.4v, which is SmartDoctor's limit.
Last edited by Bootup05; 12-12-2009 at 07:07 AM.
Hi guys.
Anyone tryed this on 3870x2 ?Well i did, but i dont know how much voltage can gpu take
GPU @ 945-1.3375v
p.s. i always had one question about 3870x2, if i set clocks in dn. riva tuner or so, are they applied at both GPU-s or, just one, from GPU-z i can tel is only one...i mean. All this time i didnt even bother with this question
Go to this link : http://www.guru3d.com/article/overcl...deon-hd-4890/2
Download the Rivatuner Radeon 4890 configuration file and install it.
I got the same rror as you and installing this fixed it
Hi guys.
Anyone tryed this on 3870x2 ?Well i did, but i dont know how much voltage can gpu take
GPU @ 945-1.3375v
p.s. i always had one question about 3870x2, if i set clocks in dn. riva tuner or so, are they applied at both GPU-s or, just one, from GPU-z i can tel is only one...i mean. All this time i didnt even bother with this question
I´ll keep it at 1,45V for Top if its enough for 1GHz.. just trying see what is enough. I start ocíng my card when get better motherboard and can put my older 3850 (bios and volt mod) with my newer 3870X2 at CrossfireX.. im bored for this mb crap and no one post anything to my problem thread so what ever...
Did anyone find out why raising gpu voltage on 4870x2 gives no benefit to 3dmark2006 benching frequencies?
Core i7 3930K|EK Supreme HF 2 x PA120.3 1x TFC Feser 240 DDC3.25 XSPC ResTop 3x SUNON Maglev 6xPanaflo FBA12G12H 2xSanAce 9G1212H1011 4xEK-FC R9-290X|RIVE|4XR9 290X|Corsair 4x2GB GTX2|Corsair AX1500i|WD1001FALS + SSDNOW V300|HP LP2475w|Luxeon 5.1WH|Logitech G500|Lian Li A70B
Posting Permissions
Reply With Quote
Bookmarks