Well im at 4.0 and im stable. Ive tried to do 4.2 but no matter my settings or volts I cant get it. Im plenty happy at 4.0ghz and I plan to use this for 24/7. I just want to check to make sure my settings are good.



Mother Board ( EVGA X58 760 )
Bios ( s61b )
CPU ( 920 D0)
CPU Cooler ( D-tek v2 )
Memory ( Corsair Dominator GT 1866 6gb )
PSU ( Corsair hx620 )
GPU ( XFX 4890 )
Operating System ( Windows 7 Ultimate x64 RC )


Frequency Control
CPU Clock Ratio ( 21X )
CPU Host Frequency (Mhz) ( 191 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( Auto)
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Enable )
PCIE Frequency (Mhz) ( 102 )
OC Recovery ( disabled )


Memory Feature
Memory Speed ( Std. )
Memory Control Setting ( Enabled )
Memory Frequency ( 2:8 1067Mhz )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 7)
tRCD Setting ( 8 )
tRP Setting ( 7 )
tRAS Setting ( 28 )


Voltage Control
EVGA VDroop Control ( With VDroop )
CPU VCore ( 1.35 )
CPU VTT Voltage ( +175 )
CPU PLL VCore ( Auto )
QPI PLL VCore ( Auto )
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( +0mV )
IOH VCore ( Auto )
IOH/ICH I/O Voltage ( Auto )
ICH VCore ( Auto )
VTT PWM Freq (4990Khz)
CPU PWM Freq (1210Khz)
CPU Impedance (less)
QPI Signal Compensation (less)

CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.8 )