UnOfficial Asus Rampage II Extreme Thread

[Trynity]

ok, here are some of them:

SPI 32M:


SPI 1M:


Cinebench10 x64:


i haven't screened my linx run's, so i have to redo it

regards,

tryn

[matcur]

Hello I need help
I get my Xeon w3520 Batch 3919A652 and more than what I do I can not exceed 205 blk no matter what voltage or configuration.
Probe with memories 2000, 1600.
It appears that I have a big wall.
The most you get is 1.39 vcore for 200x21 stable
Since the probe down to 19 and increased to 16 to try to overcome the 205 but it is impossible.
I wonder if someone has my batch we me and if you experience the same.

My mother is a Rampage II Extreme and have perfect Storm G. Skill 2000 MHz
thanks

Sorry about my English

[Trynity]

try lower vcore, i don't have a Xeon, from what i've read they run high clocks also with lower vcore

i've seen some that can archive 21x200 @ 1.184vcore

also - post more infos

what cooling?
Temps?
Timings?

Post qpi/dram voltage, Dram Voltage and all such things

There is no Generic Rule for Voltage/Mhz !!!

Try to push the QPI/Dram Voltage to 1.293 to get it to (likely) 210mhz

As i said, try for yourself how much you need

tryn

[Trynity]

for Small FFT i had to bump the Vcore a little bit

with lower it crashed @ 16k

[zalbard]

for Small FFT i had to bump the Vcore a little bit

Very nice result!
What cooling do you use?

[Trynity]

Water, HK3.0 / Mora2 with 9x120@7V, Pump is Eheim 1048 Station with Reservoir (now 4 Years Old, but it works)

[Salamndar]

Right now I'm trying to find the highest Bclk I can reach, Alas I can't break 208MHz what ever I do, the PC wouldn't boot windows at all!

I tried with qpi/dram voltage of UP to 1.45 and CPU at 1.37...no luck !!

[matcur]

try lower vcore, i don't have a Xeon, from what i've read they run high clocks also with lower vcore

i've seen some that can archive 21x200 @ 1.184vcore

also - post more infos

what cooling?
Temps?
Timings?

Post qpi/dram voltage, Dram Voltage and all such things

There is no Generic Rule for Voltage/Mhz !!!

Try to push the QPI/Dram Voltage to 1.293 to get it to (likely) 210mhz

As i said, try for yourself how much you need

tryn

Rampage 2 extreme
Xeon 3520 batch 3919A652
G.Skill Storm 2000mhz 8-8-8-21 1n
These are the bios settings I use to have it stable at 200x21








Temperatures do not exceed 70 degrees in LinX.
On Antec 850 Quattro
MCP655b pump cooling Swiftech Apogee GTZ in Cpu and Swiftech waterblock on the NB
Radiator 3x12

Well I hope somebody can help pass the wall of 205
Thanks

[Salamndar]

Rampage 2 extreme
Xeon 3520 batch 3919A652
G.Skill Storm 2000mhz 8-8-8-21 1n
These are the bios settings I use to have it stable at 200x21








Temperatures do not exceed 70 degrees in LinX.
On Antec 850 Quattro
MCP655b pump cooling Swiftech Apogee GTZ in Cpu and Swiftech waterblock on the NB
Radiator 3x12

Well I hope somebody can help pass the wall of 205
Thanks

You are stuck at 205, I'm at 208, not sure is it a CPU related or just a picky mobo!

[punkrockpolak]

What's the highest stable bclk anyone has reached with this board?

[Trynity]

i'am currently @ 225bclk - still testing

4733mhz under Water .....

[Salamndar]

i'am currently @ 225bclk - still testing

4733mhz under Water .....

Could you please state your settings?

[Trynity]

yes

I take some bios shots

here is the current bclk, SPI 1M / 32M





regards

[Salamndar]

Yes some BIOS screen shots would help us see if we made something wrong!

I'll compare your BIOS shots with my BIOS settings as soon as you post the pics.

THX.

[Trynity]

here some shots:







regards

[Salamndar]

Great, Thx for the pics, I'll be leaving the office in 4 hours and I'll compare them to my settings then.

Peace...

[Salamndar]

Trynity, what graphics card are you using, from the PCIE clock of 103 I think it is not a dual chip card !

[Trynity]

Radeon 4890HD (SingleGPU)

[Salamndar]

Radeon 4890HD (SingleGPU)

No wonder, with my 2x 4870x2 cards I won't be able to puch the PCIE at all, they don't like it !

[matcur]

Try your configuration but it was the same
203 without problems. 204 I have to turn up the voltage of the QPI / Dram too 1.45 and 205 no way
I think my Cpu for some reason is stuck in that bclk.

Any other suggestions
my videocar is Asus 5870

[Trynity]

hm.... i can set 219bclk without punishing the PCIE .....

normaly i thought the bclk is Mainboard Related?

My RIIE is Rev2xx

[Salamndar]

I might have to raise the IOH voltage a little and see..... I set voltage to auto for it, I;ll try your voltages.

[Salamndar]

Strange, my wife just called me and informed me that the PC is not responding and seems like a total system freez!

I completed an 8 hour prime95 test and it was fine!

I need to attend it ASAP! :

[Salamndar]

OK Currently testing with the same voltages as Trynity xept the CPU @ 1.27

Currently Bclk is @ 209.5 should keep testing it more than 8 hours of blend prime95.

If every thing is OK I should try and raise the Bclk a little higher.

[jasonelmore]

Glad to see this board is still going strong. I'd like the thank the dedicated members who surf this board on a regular basis and assist with any questions that may arise! I will continue to update the front page with all major bios release's, as well as updated software! I've loved my Rampage II Extreme from the day i bought it, and it's still going strong. Hell of a board asus