Quote Originally Posted by Bobbylite View Post
I wouldnt change anything quattro looks great
thanks

Quote Originally Posted by Capper5016 View Post
Now that you have it stable, do a little tinkering and see if it helps you push it a little further, or if it allows you to lower the VCore, or if it affects benchmarking results:

for your OC, you can probably switch to "Without VDroop" and run the VCore at 1.265 to 1.275 (put it under load, and see what your voltage rises to after a few minutes, then adjust your VCore to the closest setting to what you see under load). As to your VTT, at that freq, you can probably leave VTT at "Auto", with the Classifieds I've played with, I didn't have to add VTT until I passed 4.2GHz.....especially with the Uncore at "Auto" (its fine there unless you are trying to squeeze every last benchmarking point out of your system).

BRB to "3" (This is found under Memory Settings and improves memory scores)
VTT PWM Frequency to "610"
CPU PWM Frequency to "1210"
CPU Impedance to "Less"
QPI Signal Compensation to "Less"
thanks again, its actual "Without VDroop" i overlooked the template .
ill try reducing the vtt and test again, im going to OC further after i get the nb/sb block from BitsPower + other components .
also the RAM im using is my friend's im ordering DOMINATOR GT, 6GB (3x2GB), 2000MHz, 7-8-7-20 , will it play well with classified ?