Quote Originally Posted by Capper5016 View Post
The readings are off, but not terribly. They are a good guide for someone who doesnt have a multimeter (As in keeping the guys hardware safe). If the guy doesnt have a multimeter, then telling him to keep it within the guidelines based on what he has available is simply sound advice.

Mine, ELEET says 1.3V, actual (DMM) is 1.33V.
All Classifieds I know of would mostly undervolt VTT, some exceptions will get you what's been set in BIOS. All reports of too high vtt I've been reading were from people relying on BIOS readings (Eleet)...

My board was always showing about 0.1V too high vtt. 1.35V set resulted in 1.324V under load and idle - eleet reading 1.43V!

That's the case with all the classifieds friends and fellow ocers are/were owning. Some of the 760 I know of were at least getting you the set voltage for DMM readouts.

You really might have an EXCEPTION board here, as the classified has been out for quite some months now and I never saw any reports about too high vtt DMM readouts anywhere on the web.