Asus ROG Matrix GTX 285 Review

[Leeghoofd]

I have to look in my pictures mate, these are some piccies with my Rev1 eVGA card





The cooler :

[Ced-G60]

Well, am no expert on this, but it doesn't look like any of the rev1 or 2 fitting :x

edit: After a quick look at EK web site It look like the rev 2 block goes in

http://www.coolingconfigurator.com/w.../3830046993922

[Leeghoofd]

I would ask Eddie of EK first mate, this is not a real reference design, best bet is to grab a Swiftech MC60 and cool them rams and PWM's with heatsinks...

[saaya]

I can save you the trouble of trying it: it doesn't work with multiple cards AT ALL

huh? that sucks... there must be some way to do it... i doubt they overlooked something like this...

The memory settings had a big impact I found running 3D03 it gave me another 175 points running 3D05 was not that much different but I think this was down to me, as time is needed to find out what works best, I cannot comment on what Madsrimps results where but I truly found some gains playing with the memory timings.

hmmm nothing major, but def a nice add-on feature wise

[Ced-G60]

I would ask Eddie of EK first mate, this is not a real reference design, best bet is to grab a Swiftech MC60 and cool them rams and PWM's with heatsinks...

I sent them a mail, but they were pretty much of no help... Its say it's a visual fit. But the PCB on the right side look completely different then any rev1 or 2 card.

Well, i guess i won't be getting this card

[Chris_redfield]

If you attached a waterblock would you still be able to have the LED's on the side of the card that monitor load or are they directly to the heatsink?

[[200]]

If you attached a waterblock would you still be able to have the LED's on the side of the card that monitor load or are they directly to the heatsink?

It will be attached to the casing that you would have to remove to put the waterblock on.

[Mod_Aap]

huh? that sucks... there must be some way to do it... i doubt they overlooked something like this...

The software does work with multiple cards.

And I also have a batch script where you can set the voltages of multiple cards to 1.9V at maximum.

[miahallen]

Reserved for cold testing results

[sacha35]

I have not forgotten about this but just have not had time yet to go cold, please be patient and I will get some results up soon.