Single PCB GTX 295 Vcore mod

[FatAlbert]

oh tell the guy who will be testing this under cold that he shouldn't show before he won't do the 950+ on core with this mods

[X2beach]

how much more O/C do you get when you Watercool your gtx 295

[rbuass]

We mod (me and Barrel)
0-1-0 1-1-0-0-0 and run at 1.44 tested
But i did try to adapter 2 x GTX285 LN2 blocks and its not fitting (shock with PCI ex connector).
One of the 2 GPUs isn t working well





We reach 870/1250 Mhz few minutes but there are no good contact in the surface and the GPU get hot.

After i will try again (waiting a good VGA pot)

Very nice work Evocarlos; can you help me with the OCP?
Have any pics to follow?

Thanks

[EvoCarlos]

We mod (me and Barrel)
0-1-0 1-1-0-0-0 and run at 1.44 tested
But i did try to adapter 2 x GTX285 LN2 blocks and its not fitting (shock with PCI ex connector).
One of the 2 GPUs isn t working well





We reach 870/1250 Mhz few minutes but there are no good contact in the surface and the GPU get hot.

After i will try again (waiting a good VGA pot)

Very nice work Evocarlos; can you help me with the OCP?
Have any pics to follow?

Thanks

http://www.xtremesystems.org/forums/...0&postcount=41

the images in that post show the ocp mod i have done i removed the 200k resitor form the card and fitted 2x 100k vr's in SERIES to make it 200k

but in my testing by lowering the impedence there was no affect

atm my cascade is broken and i need to fix that before i can test again my card just may want more voltage to go more but its hitting ocp with 1.3v and 800/1610/1300mem it will pass vantage at 800/1600/1300 on air at 1.3 no ocp mod

i just need more time to get it worked out

[MaadDaawg]

Just looked at the back of my 295 Co-op These friggin things are TINY

No way my tremblin old hands could work with that without incurring serious damage to both my hands and the cards

I have my cards on water right now, but they seriously need more volts. I was SEVERELY disappointed that evga's voltage tuner won't work on their own cards Any way to do it software wise using Riva Tuner ???

Short of that, what would it cost me to have the dip switches installed on both cards ??? They'll be going LN2 one of these days, but not for a few months so the switches would be nice

And EvoCarlos.. love your avatar