Has anyone heard of any problems or tested the NEW version of Corsair GT 2000CL7?
Has anyone heard of any problems or tested the NEW version of Corsair GT 2000CL7?
i dont think gary killed a single kit with an esd :POriginally Posted by Yellowbeard
That's hilarious.
I know it is not the case but it makes me picture Bingo13 with his shoes off, wearing a wool sweater, petting a kitty cat, and rubbing his toes in deep shag carpet while installing modules.
Let's hope this Elpida madness is behind us.
i dont think its behind us, the bad batches are deployed and some seem to live for quite a few weeks or even months before going belly up, so we will probably see elpida hyper kits with a higher than normal failure rate for some more time...
corsair did an excellent job though in pulling back bad stock, or possibly bad stock, so prevent as many rmas and customer woes as possible!
i think kingston and possibly others still have bad inventory themselves or at distries/shops that havent been sorted out, so for them this could be stretching over months...
visit the tradeshowsYou did well, I only got sent the modules. What do I have to do for the extras - (especially the :banana::banana::banana::banana::banana:)?
CRISIS OVER!
i thought one of my sticks was dead, then i thought my classified ram slot was dead, then i thought it was the stick again...
a lesson to be learnt here is, dont eat your SILF over the motherboard!
i told you those club sandwiches will give you a heart attack (just made that up eek)
Finding new ways of keeping it alive
Last edited by Raja@ASUS; 09-03-2009 at 05:44 AM.
hah, good luck
i doubt it helps much though, i heard from 2 people who sub zero cooled their kits and they stilled died during a single session...
but it cant hurt
Sweet sticks you Raja, loving the cold i suppose
cold tolerance varies from kit to kit, just like in the "d9" days ...hah, good luck
i doubt it helps much though, i heard from 2 people who sub zero cooled their kits and they stilled died during a single session...
but it cant hurt
nice one raga, corsair on E657/8
show us the frequency
my first Hypers had CB@-10 look like yours no have CB ?
No CBB bug on mine even with evap this cold. This is the new Corsair i5 kit.
First 10 mins were great 32M @ 2200 CAS 8-8-8-24 1N @ around 1.46V. After that though IMC got too cold and things got worse before I could really start clocking.
later
Raja
almost similar imc cbb with i7s?
Don't forget though that the i5's used now derive from an early stepping
about how long is the kingston rma-to-shipping process
1
With my faulty modules i was never able to run them @ 2000Mhz with 7-8-7-20-1T timings.. BSOD in linX what ever volts i would use all the time..
The new (ic) modules are def fixed
Last edited by AceBaran; 09-05-2009 at 01:59 AM.
Apple MacBook Air
Apple IPad 2
so i take it the kingston : KHX16000DULT1K3/3GX is Elpidia hyper ic's
and the : KHX2000C8D3T1K3/3GX is Elpidia BBSE?
i had one stick drop out after 3days 2000 7-7-7-20 1.68v
sent them back to kingston uk but now due to postal strike i still aint got them
they have told me there swapping them
Item #: KHX16000D3ULT1K3/3GX Replaced by: KHX2000C8D3T1K3/3GX
I LOVE LAMP!
so which one failed KHX2000C8D3T1K3/3GX or KHX16000DULT1K3/3GX ?so i take it the kingston : KHX16000DULT1K3/3GX is Elpidia hyper ic's
and the : KHX2000C8D3T1K3/3GX is Elpidia BBSE?
i had one stick drop out after 3days 2000 7-7-7-20 1.68v
sent them back to kingston uk but now due to postal strike i still aint got them
they have told me there swapping them
Item #: KHX16000D3ULT1K3/3GX Replaced by: KHX2000C8D3T1K3/3GX
I was told the same about swapping those kits. I told them I like money better which I will get in a month or less hopefully.
KHX16000DULT1K3/3GXthey are also now discontiued
I LOVE LAMP!
I had 6gb kit, ran 4 months and then 1 stick died.KHX16000DULT1K3/3GX
kingston is now sending out the new batch for rma's KHX2000C8D3T1K3/6GX
1
yeah i got mine yesterday but its only 3gbnout i got uses 6gb lol
http://i556.photobucket.com/albums/s...5092009515.jpg
there not as good as the others not by a long way
I LOVE LAMP!
Why what is so bad about these kits? Perhaps different ic's on them? Care to explain a bit more.
dont get me wrong there not the worst set
but when benching with them earllyer they need loads of volts to run stable for vantage 8-8-8-20 i was touching 1.8v the old set were stable 7-7-7-20 1.72 but they did only live 4days from new lol
im still playing with the new so lets hope they go well past the 2000 7-7-7-20
i need to play with the subtimmings more
I LOVE LAMP!
I got the older set back about i say a month ago, can't recall the exact date though. But i got the older batch number and i could hit 2,175 mhz with default timings and 1.65v with ease. But it seems my C0 chip and or my asus doesn't like each other along with the G-15 weird keyboard issues. So i stopped there with mine
so what speeds are you hitting with the new kingston kits? 2000 888 with 1.8v?
that could be samsung or micron as well easily...
Guys, need some help
I was wondering if the following kits are the famed dying elpidas
link here
i7 920@4.34 | Rampage II GENE | 6GB OCZ Reaper 1866 | 8800GT (zzz) | Corsair AX750 | Xonar Essence ST w/ 3x LME49720 | HiFiMAN EF2 Amplifier | Shure SRH840 | EK Supreme HF | Thermochill PA 120.3 | MCP355 | XSPC Reservoir | 3/8" ID Tubing
Phenom 9950BE @ 3400/2000 (CPU/NB) | Gigabyte MA790GP-DS4H | HD4850 | 4GB Corsair DHX @850 | Corsair TX650W | T.R.U.E Push-Pull
E2160 @3.06 | ASUS P5K-Pro | BFG 8800GT | 4GB G.Skill @ 1040 | 600W Tt PP
A64 3000+ @2.87 | DFI-NF4 | 7800 GTX | Patriot 1GB DDR @610 | 550W FSP
7-7-7-20 1.74v b2b=31
but it was not stable for vantage at tho's speeds had to up it to 8-8-8-20 1.8v it would prolly have gont thru @1.8 7-7-7-20 but never got the chance to test
also whats the best way to get the sinks off? hair dryer?
I LOVE LAMP!
Posting Permissions
Reply With Quote
Bookmarks