Some reservoirs I made this week.

[CyberDruid]

Neat waterfall Zen effect.

With five of them running on two loops it's like being by a babbling brook...not too annoying really.

Those look pretty bad ass... If it worked with my build I would probably grab one for sure. Maybe on my next build.

Question though. You may have covered this and I just missed it but what about bubbles? It seems like there are so many that they would become something of a problem.

Bubbles are inherent in a waterfall...one of the reasons most fish ponds have somethinglike that to aerate the water. Definitely a sacrifice for looks...but I try to come up with internals that limit the amount of air returning to the pump. Hence all the slight variations from unit to unit.

Looks sweet CD, you should talk to Geno about getting you some that are just the pump top section. and missing the res section so they don't stick out so far.

Geno actually PMed me to say NOOOOOOOO don't cut any more I'll send you some

Excellent work my friend! (Not the easiest material to work with)

It's actually a little nicer to cut and route than acrylic...not so stinky and sticky, but God help you if a piece gets sucked into the saw and spit back out

The 5-bay waterfall+T3 is amazing

(so are the others too, of course, but I'm totally in love with the 5-bay waterfall+T3)

I credit pTrout with getting me rolling in that direction. We went back and forth on various points and finally arrivedat the unit in the vid. It's got a great look. Even without a pump I like the smaller L dimension on this res. For cases with tons of empty optical bays I think a 3" deep res like this would be cool in as many bays as you can spare...fill em up with water

Very nice work! I like the waterfall effect!

I am interested in makingone that has the same effect with less noise and aeration. But the way light lenses through the water is my favorite.

Very nice work mate. I wish I had the skills/resources to do stuff like this. My hat's off to you.

looks great CD, I cant wait to build my next reservoir, I think its something everyone should try because its really fun and satisfying to have your own design in your case

Your res in Flow came out perfect. It's definitely a Modder's
Rite of Passage"

Wow, I love the new waterfall reservoirs. Just a question, how deep are the reservoirs with the attached typhoon III? Again, great great work.

That is definitely a limiting factor on the TyphoonII graft. The pump needs about two bays of pond in the res to stay wet and that limits what you can achieve with 3 bays. I put the first fall right off the top and could only fit one trough which will actually be half submerged. You still still get a double fall effect.

nice!

As usual CD, stellar work.

The 5 bay res, is 3.5 inches deep, and 6.5 deep at the t3 end, its going into my HAF932 build, along with a IandH bloodrage block.

The size was contrained by the feser 360.

You should see how jammed his case is with gear...there's about 1/8" clearance between res and rad.

I <3 Cyber Dude are awesome

Back atcha

Amazing. There has to be a good market for something like that, it looks unbelievable.

That would be nice. It's more fun designing them than making them.