^You could desolder equivalent resistor off from the back of another chip and measure it. Those are not too difficult nor risky to solder if you have a small enough tip on the iron.
^You could desolder equivalent resistor off from the back of another chip and measure it. Those are not too difficult nor risky to solder if you have a small enough tip on the iron.
You were not supposed to see this.
E2180 @ 3.4ghz | 2x1gb OCZ Platinum 800 | 2x1gb Reaper HPC | Gainward HD3850 | OCZ StealthXtreme 600w | Western Digital 2500AKS |
Yes, I'm a cheapskate.
Bookmarks