UnOfficial EVGA X58 Classified Owners Thread

[massman]

could it be different cpu multipliers used?

When testing the chip of Blind a couple of weeks ago I could hit 240+ easy with 21x multiplier, so the board's capable of doing more than the low 230MHz. At 23x all three chips maxed out completely at around 233MHz, suicide, and 228MHz benchable.

I have a couple of links to scores:

- Blind's 950: pifast at 228MHz BCLK, 1100+ memory
- Gamer's 3540: pifast at 229MHz BCLK, 1100+ memory
- My 950: pifast at 232MHz, 929MHz memory

Max suicide is about 233MHz BCLK. Don't think I've ever seen 234MHz with the 23x multiplier on this board.

Btw, regarding Blades: only issues I've seen so far I already mentioned in PM. First two results are with the Blades and we had no issues running them. Blind had the same problems I already mentioned after this LN2 session; I already tested the kit on other boards and the kit is fully functional. Btw, I can actually get the blades running; all I have to do is manually adjust the timings/voltage with another memory kit, shut down and change to blades. As long as I don't clear the CMOS it runs just fine at 1150MHz CL8.

[TONY GAL]

all 950 runs 23x without turbo very well(230-+),but my question is for the psu if the mobo runs high bclk stable with the 2 (8 pin )?because i have one 6 pin to my psu and one 8 pin.i ask my friend hipro and tell me that is no problem'
your opinion?

[Sh1tyMcGee]

Hey guys, quick question, 3x SLI with the E760 version, does it run 16x/8x/8x ??? thanks.

[TONY GAL]

Hey guys, quick question, 3x SLI with the E760 version, does it run 16x/8x/8x ??? thanks.

yes and 4 cards ati runs 4x8!=32

[Sh1tyMcGee]

yes and 4 cards ati runs 4x8!=32

Ok, the 1st slot will remain at 16x? thats my main concern.

[TONY GAL]

Ok, the 1st slot will remain at 16x? thats my main concern.

yes the first slot and the third slot is 16x .2 cards runs 16x on first slot and third slot .when you put three cards run 16x 8x,8x=32.
4 cards run 8x

[Sh1tyMcGee]

yes the first slot and the third slot is 16x .2 cards runs 16x on first slot and third slot .when you put three cards run 16x 8x,8x=32.
4 cards run 8x

ok cool, have you tried this to confirm, because i have heard the e760 does only 8x/8x/8x for 3x sli

[LardArse]

there a new bios at the evga forums have u tried
http://www.evga.com/forums/tt.asp?forumid=68

[TinTin]

there a new bios at the evga forums have u tried
http://www.evga.com/forums/tt.asp?forumid=68

Got problem with my E759 even entering BIOS setting, everytime, I hit DEL, a flashing white line on left top corner, then reboot.
Very hard to get in, once I can get into BIOS setting, I flashed it back to 21S.

[hiwa]

there a new bios at the evga forums have u tried
http://www.evga.com/forums/tt.asp?forumid=68

Thanks for update
will try

[LardArse]

i been trying to replicate this and imitating your setup but i cant get the white line error, any special setup hw used?

[raptor1]

The first page has been updated with links to the new bios for the 759 and 760

[Leeghoofd]

Looking at the eVGA forum it's better to pull these as it seems there are still some issues with it, Shamino also told on the forum there will be an update to fix the whiteline error in a few days...

[SAE]

Yep, he was asking for one or two days to be able to fix it. So be patient and don't flash.

[WaterFlex]

What is the best full cover WB for this mobo?

[SAE]

A question of taste. In my eyes it's the EK acetal block. Then there's the clear EK that's also great looking. Best performance has the MIPS set afaik and there are peops prefering the simple and clean looks of it. The koolance is also nice and of good quality. I find the BP to be way overpriced...

[gatecrasherlok]

Yeah EK's and Koolance blocks are probably the choice for most. The bitspower block which is nice but is very expensive.

[sholvaco]

ok cool, have you tried this to confirm, because i have heard the e760 does only 8x/8x/8x for 3x sli

Just a heads up: it does x8/x8/x16 in tri SLI mode or x8/x8/x8/x8 in tri SLI plus PhsyX. The #1 x16 slot only runs at x16 when the slot directly below isn't occupied; same goes for #3 (you'd want to run the cards in these two slots for dual SLI setup for example).

[FabricioGS]

Guys, please help me out. I'm with this 760-A1 for a couple of weeks now and I'm able so far to run 21x198 and a high uncore/memory with stability:



Above 198 I can't get the system stable anymore. I reboots usually with the 0x000000124 BSOD. I tried up to 1.32500 vcore and up to 1.40vtt and 1.70 vdimm and still nothing. What should I try?

[TONY GAL]

try to boot with 200x21,210x21 ...the mobo dont do big step!

[FabricioGS]

I'm already booting with 200x21 or more, yet no stability with any voltage combination.

[rabor]

Will my saved bios-profiles still be there after flash?

[Viss]

They wil mate but dont use them, make new ones after flash

[r1rhyder]

I'm already booting with 200x21 or more, yet no stability with any voltage combination.

124 is a memory error, raise your QPI voltage.

[FabricioGS]

Ok, thanks. I'll give it a try.