Retail Q9650 Overclocking Thread

[NapalmV5]

template?? this whole thread is plastered with my results/voltages

4.6ghz @ extreme: 1.62vcore/1.64vpll/1.66vtt/1.80vmch/2.66vdimm fsb:mem 4:5

4.8ghz @ dq6: 1.6vcore/1.6vpll/1.8vtt/1.8vmch/2.6vdimm fsb:mem 1:1

note: much higher load on the extreme than on the dq6


you guys are water/freezing water/phase/whatnot cooling and then youre telling me if i ever tried lower vtt

for air cooling higher vtt is what keeps it going

then again i guess im just a retard maxing voltages for no reason

[andressergio]

template?? this whole thread is plastered with my results/voltages

4.6ghz @ extreme: 1.62vcore/1.64vpll/1.66vtt/1.80vmch/2.66vdimm fsb:mem 4:5

4.8ghz @ dq6: 1.6vcore/1.6vpll/1.8vtt/1.8vmch/2.6vdimm fsb:mem 1:1

note: much higher load on the extreme than on the dq6


you guys are water/freezing water/phase/whatnot cooling and then youre telling me if i ever tried lower vtt

for air cooling higher vtt is what keeps it going

then again i guess im just a retard maxing voltages for no reason

Napalm this is dedicated to you Jor3LBR and OC nub, my first BOOT from BIOS at 535x9 = 4815
NOT using ET6
using auto timmings just to try



Cheers all
Sergio

[NapalmV5]

Napalm this is dedicated to you Jor3LBR and OC nub, my first BOOT from BIOS at 535x9 = 4815
NOT using ET6
using auto timmings just to try



Cheers all
Sergio

thanks mate but dont have to dedicate to me

thats just 4.8 foreplay right there^ at such low voltages

set vtt to 1.7 max
set vmch to ~1.8
set vpll @ 1.74/1.8 whichever boots up
set vcore @ 1.55-1.575
set vdimm @ 2.5 trust me i got the same kit and runs ~2.7 on a daily basis

ram timmings: set 5-5-5-15 and the rest of the timmings set to what the bios shows

try both 1:1 4:5

you havent seen what your setup can do yet mate.. give it hell and you shall reap new oc clocks

[andressergio]

thanks mate but dont have to dedicate to me

thats just 4.8 foreplay right there^ at such low voltages

set vtt to 1.7 max
set vmch to ~1.8
set vpll @ 1.74/1.8 whichever boots up
set vcore @ 1.55-1.575
set vdimm @ 2.5 trust me i got the same kit and runs ~2.7 on a daily basis

ram timmings: set 5-5-5-15 and the rest of the timmings set to what the bios shows

try both 1:1 4:5

you havent seen what your setup can do yet mate.. give it hell and you shall reap new oc clocks

thank you napalm will try

[OC Nub]

template?? this whole thread is plastered with my results/voltages

4.6ghz @ extreme: 1.62vcore/1.64vpll/1.66vtt/1.80vmch/2.66vdimm fsb:mem 4:5

4.8ghz @ dq6: 1.6vcore/1.6vpll/1.8vtt/1.8vmch/2.6vdimm fsb:mem 1:1

note: much higher load on the extreme than on the dq6


you guys are water/freezing water/phase/whatnot cooling and then youre telling me if i ever tried lower vtt

for air cooling higher vtt is what keeps it going

then again i guess im just a retard maxing voltages for no reason

I just ordered this board, the dq6. Did you do mod to reduce vdroop? I should get the board in tomorrow. Am excited to try something different.

[andressergio]

I just ordered this board, the dq6. Did you do mod to reduce vdroop? I should get the board in tomorrow. Am excited to try something different.

Congrats mate !!!

[OC Nub]

Congrats mate !!!

Thanks Sergio will keep you posted on results.

Nice Jor . Miss seeing your posts on this thread.