OC Report :: OCZ Blade 3x2GB PC3-16000 CL7

[Leeghoofd]

We are benching the blades on a classie to this afternoon, hoping we can get them speeds too...

EDIT : We got them up to 1137Mhz with 1.7Vdimm on the classified :p (in fact I just watched to see that Massman didn't overvolt them lol)

[viking]

Did anyone try this ram on Socket 775 setup ?

[drnip]

Nice results 3oh6!!! Hopefully my RMAed ones will put like yours. Mine are black and 1 stick crapped its pants after 24 hours of use. Really a lil over a hour or two of use as I didn't get much time to play with them. Ran them at stock specs. There are too many horror stories of Elpida Hypers dieing left and right.

[Leeghoofd]

Continued testing on the Gene II 2200Mhz PI32m stable with B2B 10

[eva2000]

nice work... B2B 10 ??

[Leeghoofd]

Back to Back CAS delay (aka the performance killer ) Massman is working on my collected data to get a small review out of what it does and how it influences ram bandwith

[eva2000]

Interesting.. will keep an eye out for that review for B2B

[Leeghoofd]

At the moment we only find it in the Asus bios and MSI is adding it too on their lineup... The Asus setting is too tight, resulting in stability issues when running eg 200Bclock/2000mhz ram in triple channel config.

[dj883u2]

My Ocz:

[gandalfone]

Interesting try 8.9.8.x....I sow raja setup and great spi32m 6'42''
I will try it, but under LN2....on h2o I get 1100 8.9.8.24 1.72v

[3oh6]

after getting the PC3-17000 Blades, these PC3-16000's have been sitting on a shelf but i brought them out last night
for some AM3 fun. they seem to clock 8-9-8 as well as their big brother and don't mind the 1200MHz area at all

[hiwa]

really nice AM3 jody and crazy moduls there
Congrats
share you RTL's if is possibile

[3oh6]

really nice AM3 jody and crazy moduls there
Congrats
share you RTL's if is possibile

thanks. share my RTL's? why not just ask me to strip and prance around on all fours


67-69-71

[hiwa]

you are man

Thanks for shating

[Leeghoofd]

thanks. share my RTL's? why not just ask me to strip and prance around on all fours

you ain't got no boobs (I presume), not interested, I'll pass this time

Nice clocks sir, 1.75 ELeet is 1.75 real or even more ? 1.65 set in bios was over 1.72 on our board

[3oh6]

you ain't got no boobs (I presume), not interested, I'll pass this time

Nice clocks sir, 1.75 ELeet is 1.75 real or even more ? 1.65 set in bios was over 1.72 on our board

you shouldn't presume anything

E-LEET is pretty much bang on for vDIMM on my board. i am not sure if they needed that much. my PC3-17000's will run this with 1.70v so these being a little weaker at 7-8-7/7-7-6/6-7-6 in 32M, i figured set 1.75v and forget about it.

[eva2000]

nice clocks mate.. time for some blade 16000 + 17000 @12GB action hehe

[Aerou]

nice clocks mate.. time for some blade 16000 + 17000 @12GB action hehe

damn ... You don't give that IMC a break, do you?

[gandalfone]

Very nice shot jody!!

[TONY GAL]

my friend i buy this rams with black pcb and the rams is very bad..
play 2000 with 7-8-7-20 wants 1,79 volt and not 1,65 and the chips says inside ocz ocz x43e1288ak-125b
this chips is not elpida HYPER BECARFUL THE OCZ 7-8-7-20 WITH BLACK PCB is very bad, BIG PROBLEM GUYS!

[rabor]

my friend i buy this rams with black pcb and the rams is very bad..
play 2000 with 7-8-7-20 wants 1,79 volt and not 1,65 and the chips says inside ocz ocz x43e1288ak-125b
this chips is not elpida HYPER BECARFUL THE OCZ 7-8-7-20 WITH BLACK PCB is very bad, BIG PROBLEM GUYS!

Bollocks.. mine have black pcb's too & they are running @ 1000MHz 7-8-7-21 T1 with 1.63V since March..

So either they're faulty, or you need to give them a little more vQPI/vVTT. Mine need 1.45V on both Rampage II Extreme & EVGA Classified 760, regardless what CPU..

Edit: Just swap them. You got lifelong warranty.

[TONY GAL]

Bollocks.. mine have black pcb's too & they are running @ 1000MHz 7-8-7-21 T1 with 1.63V since March..

So either they're faulty, or you need to give them a little more vQPI/vVTT. Mine need 1.45V on both Rampage II Extreme & EVGA Classified 760, regardless what CPU..

Edit: Just swap them. You got lifelong warranty.

qpi=1,47 and vtt like 1,47-1,55
the rams play 2000 with 7-8-7-20 with 1,74 in bios real 1,78 ,i tried to play 7-7-7-20 1900 and nothing with 1,80 real only 7-8-7-20 with 1,78 real 2000

[Ronbo56]

I just received a brand new set from amazon, but due to their incompetent shipping dept. all three modules were thrown out of their packaging. One pcb was bent. Tested the other two and they booted at 7-8-7-20 1T on a classified, 920 DO at 3 gigs. When I oc to 4200 my system would not even boot no matter what settings I had. It refused to boot at 7-8-7-20 1T. No problems with my mushkin redlines, so much for OCZ I think the new hypers if they are hypers are not worth the time or money

[eva2000]

my friend i buy this rams with black pcb and the rams is very bad..
play 2000 with 7-8-7-20 wants 1,79 volt and not 1,65 and the chips says inside ocz ocz x43e1288ak-125b
this chips is not elpida HYPER BECARFUL THE OCZ 7-8-7-20 WITH BLACK PCB is very bad, BIG PROBLEM GUYS!

ouch, if you test each 2GB module individually how does each do ?

I just received a brand new set from amazon, but due to their incompetent shipping dept. all three modules were thrown out of their packaging. One pcb was bent. Tested the other two and they booted at 7-8-7-20 1T on a classified, 920 DO at 3 gigs. When I oc to 4200 my system would not even boot no matter what settings I had. It refused to boot at 7-8-7-20 1T. No problems with my mushkin redlines, so much for OCZ I think the new hypers if they are hypers are not worth the time or money

ouch any photos of the mess ??

[hiwa]

sent a kit like 2 weeks ago to rma, hope to get hypers
will post when they back